Peugeot RCZ

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

Connects2 Fakra to DIN & ISO Antenna Adaptor with Phantom Power Supply, Converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna ..

Phoenix Gold ZDT-PSA1 T-Harness With a Quadlock (16 Wires Populated In Radio Connector)Upgrade your vehicle’s audio with our T-Harness. Our plug-and-play solution makes it easy to upgrade your audio by integrating seamlessly with our amplifiers. Built for a hassle-free installati..

Citroen / Fiat /  Peugeot Toyota & Vauxhall Quadlock cable to be used in conjunction with an ISO Mute harness normally supplied with the hands-free car kit.With flying lead to connect to +12 volt ignition.This cable fits behind the car radio and is used as a break-out cable to enabl..

USB Retention CableKeeps original USB socket on Citroen, Kia, Hyundai, Peugeot & Toyota cars. Allows you to maintain the cars existing USB socket and use it with a new aftermarket head-unit. This unit uses the cars original housing. Works on all newer model Citroen / Kia / Hyundai / P..

Combined Steering Wheel Control Interface with built in Aerial Adaptor. One solution for simple integration.Upgrade to an aftermarket head unit whilst maintaining the use of your factory steering wheel controls. The NEW range of interfaces combined steering wheel control interfaces with built in..

Phoenix Gold ZDT-PSA4 T-HarnessThe Phoenix Gold ZDT-PSA4 harness simplifies audio integration when paired with our ZDC-ISO, ZDC-ISOH or ZDC-ISOX harnesses. Designed for seamless compatibility, it allows you to match the ZDT- cable to your specific vehicle and combine it with our ZDA or ZXM ampli..

Combined Steering Wheel Control Interface with built in Aerial Adaptor. One solution for simple integration.Upgrade to an aftermarket head unit whilst maintaining the use of your factory steering wheel controls. The NEW range of interfaces combined steering wheel control interfaces with built in..

Package IncludedPhoenix Gold ZDSKPSA2 6.5″ (165mm) 2-Way Component Car Front Door Speaker Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker KitZDSKPSA2 2-Way Speaker KitZDSKPSA2 2-Way Speaker Kit for Citron,  Peugeot and Toyota vehicles a ..

This piano-black double-DIN fascia adapter panel and cage kit offers a clean, flush-fit solution for installing aftermarket stereos in Peugeot 308 (2007–2013) and Peugeot RCZ (2010–2015) models. Many aftermarket head units are larger than the stock radio, so this adapter and cage kit fil..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

The UNI-CHIME interface allows you to retain a vehicles original parking tones when upgrading to an aftermarket stereo. With an aftermarket audio system, certain features, like parking tones, can become lost via the CAN system. But with the application of the UNI-CHIME, this information can be re-in..

A pair of speaker adapter cables for various Citroen, Fiat, Peugeot, Toyota and Vauxhall vehicle models. Use to fit new aftermarket speakers without needing to cut off the original speaker connectors.{ vehicle_compatibility }Please make sure that is the correct Speaker Harness Adaptor..

CAN BUS steering wheel control and parking sensor retention interface for Citroen, Fiat and Peugeot cars with quadlock connectors behind the radio.This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new afterma..

Connects2 T-Harness SOT Leads are primarily used when installing Parrot Bluetooth Car kits but can also be used to install other bluetooth devices and hands free kits into the car. SOT lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the ..

This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector.The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

CANbus steering wheel control and parking sensor retention interface for cars with quadlock connectors behind the radio.This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also pro..