Nissan Skyline

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

Nissan 2 prong female antenna connector to male DIN car aerial antenna adapter cable.This cable adapts from the two pin Nissan antenna connector in the car to a standard aftermarket male DIN connector, this is used when fitting a new aftermarket radio.This is a passive antenna adapter, it do..

Speaker adapter cables; used to connect after market speakers to the original loom on various Nissan models.Fits vehicles aimed towards the US and Japanese markets until approximately 2005 - please see full description for compatibility.Please make sure that is the correct Speaker Harness ..

Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN versions. Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector. ..

ISO to ISO Amplifier Integration Interface4 channel adjustable ISO to ISO amplifier interface.Use to install a new radio in a car that has an original fit amplifier that takes a pre amplified audio feed.This interface converts the high level audio output of a new head unit to a low level..

Nissan radio replacement adapter cable, allows the fitting of an aftermarket car stereo upgrade by adapting the original 10 and 6 pin Nissan connectors to standard aftermarket ISO connectors.This cable includes the power and speaker supply and will return the use of the steering wheel controls w..

Nissan radio replacement adapter cable, allows the fitting of an aftermarket car stereo upgrade by adapting the original 10 and 6 pin Nissan connectors to standard aftermarket ISO connectors.This cable includes the power and speaker supply. If the car has steering wheel controls then use item 29..

Patch lead for use with 20-XXX-SWC ISO steering wheel control cables to convert from 2 wire learning to 3.5mm jack.Use with self learning programable aftermarket units like Blaupunkt, Grundig or Road Angle. Also for some Kenwood, JVC and Sony units using their "CUSTOM" setting for stee..

ZXMPN1 is a Plug and Play power-up kit made for Nissan (for a full model list please view Vehicle Applications). The ZXMPN1 power up kit consists of a variety of technology designed to improve the overall audio output of a vehicle. The ZXMPN1 includes a ZXM500.4 Amplifier and ZXMISOT2 ISO-T harness...

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

CTAMPPASSTHROUGHThe CTAMPPASSTHROUGH is an amplifier retention adapter which converts the new head unit’s high-level audio output to a low-level audio signal which will work with the vehicle’s original amplifier (reduces the output volume from the aftermarket stereo to the factory am..

Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN versions. Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector. ..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN versions. Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector. ..

CAM-NS3-RT Nissan​ Reverse Camera Retention InterfaceThe CAM-NS3-RT is a reversing camera retention lead specially designed for use on the 2001 to 2007 Nissan Skyline. This easy to install plug and play system allows users to retain the use of the factory installed camera system when instal..

Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN versions. Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector. ..