Mitsubishi Lancer

 This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring..

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

A pair of front or rear door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your ..

Car audio metal cage kit and trim 103mm high. Needed with some double din fascias that do not fit the normal 113mm cages supplied with aftermarket head-units.This kit is designed to replace the metal cage kit that is usually supplied with your new aftermarket double din head-unit or navigation s..

The camera retention interface allows you retain the original OEM camera on multiple Mitsubishi modelsSuitable for original head units with 8 pin Grey camera connectors.Includes reverse trigger and 12v-6v adapter for plug and play installation...

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.This interface will retain the use of the steering wheel audio controls with an aftermarket head unit. Includes PHONE commands for compatible head-units.{ vehicle_compatibility..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

CAM-MT1-RT Mitsubishi​ Reverse Camera Retention InterfaceThe CAM-MT1-RT is a reversing camera retention lead specially designed for use on various Mitsubishi vehicles (See Vehicle applications for more details). This easy to install plug and play system allows users to retain the use of the..

This plug and play  cable  allows you to connect an aftermarket car radio with European iso connectors  to the cars wiring using the original connectors in the car.Harness AdaptorsConnect the head unit to the original radio connector without the need to cut any of the existing..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Package IncludesFocal 6.5 inch Coaxial Car Audio Speaker 165mm Speaker Adaptor Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker KitBass and PrecisionThis car audio kit offers high quality bass. The whole system benefits from high power handling thanks to a ..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Phoenix Gold ZDT-MTSU1 T-HarnessUpgrade your vehicle’s audio with our T-Harness for Mitsubishi vehicles. Our plug-and-play solution makes it easy to upgrade your audio by integrating seamlessly with our amplifiers. Built for a hassle-free installation, with everything you need include..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

 This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring..

Package IncludedFocal ACX 165 6.5" (16.5cm) 2 Way Coaxial Car Speaker Kit  165mm 17cm Speaker Adaptor Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker Kit6 1/2” (16,5CM) 2-WAY Coaxial KitThe 2-way coaxial kit ACX 165 delivers neutral and dyn..

 This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring..

Package Includes:Kenwood Stage Sound Series 17cm 6.5" 2-Way Coaxial Car Speaker 300 Watts 165mm Speaker AdaptorKey FeaturesStage Sound Series Flush Mount Speaker 2-Way 2-Speaker System 17 cm Polypropylene Woofer Cone Heavy-Duty Woofer Magnet Circuit 25mm Blanced ..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.you need to repurpo..