Mercedes-Benz CL

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

CAM-MB1-RT Mercedes Reverse Camera Retention InterfaceThis Universal Blue Fakra (code Z) to male PHONO socket cable allows you to retain an original reverse camera from various vehicles such as Ford, Land Rover, Porsche, Jaguar & Mercedes.For this cable to be compatible, your OEM system ..

Fakra to Din Antenna Aerial Adaptor, Suitable for Aftermarket Radio With DIN Antenna Connector. Converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Connects2 Head Unit Replacement Interface when installing an aftermarket head unit in vheicles that do not have a 12V ignition feed, such as CAN-BUS vehicles. The interface generates an ignition feed by sensing the voltage on engine cranking which then creates a stable, reliable 12V feed for the aft..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

OEM Units With Horizontal Release KeysSTEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent stereo theft. This means that to remove one of these units..

Connects2 Fakra to DIN & ISO Antenna Adaptor with Phantom Power Supply, Converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna ..

Cable to convert most Mercedes cars with Quadlock connector to a European car radio with ISO connectors. Plug and play with CAN bus ignition supply. Fits Mercedes A,B,C,CLK, ML, R, V class carsThe car has CAN bus data. The interface provides a key in ignition supply from the data.Harness A..

Connects2 Head Unit Replacement Interface when installing an aftermarket head unit in vheicles that do not have a 12V ignition feed, such as CAN-BUS vehicles. The interface generates an ignition feed by sensing the voltage on engine cranking which then creates a stable, reliable 12V feed for the aft..

These new adapters have both Male DIN and ISO connections eliminating the need to stock both DIN and ISO products, this is a must for every installer.Water Blue Fakra Antenna AdaptorAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aft..

Connects2 T-Harness SOT Leads are primarily used when installing Parrot Bluetooth Car kits but can also be used to install other bluetooth devices and hands free kits into car. SOT lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the hand..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fascia Note..

CANbus steering wheel control interface designed for all Mercedes cars with CAN bus.This interface uses requires hard wired connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as w..

OEM Units With Horizontal Release KeysSTEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent stereo theft. This means that to remove one of these units..

Retain Reverse Camera (FAKRA) for Mercedes Audio 20 and COMANDAllows you to retain an original reverse camera from a Mercedes factory fitted Audio 20 or COMAND head unit when fitting an after-market radio.This cable is only compatible with single fakra connections. Double fakra connections..

MOST fibre optic interface designed to retain the use of the original fibre optic audio amplifier (Mercedes Audio Gateway or harman/kardon amplifier) in Mercedes CL, CLS, E Class, SL and SLK cars to allow the fitting of an aftermarket radio upgrade.The interface connects at the back of the radio..

CANbus steering wheel control interface for various Mercedes cars. Gives CANbus Ignition outputs and retains steering wheel controls. The CANbus interface will also give out CAN ignition, speed pulse, reverse gear and hand brake signals.This CANbus interface will allow you to retain the audio ..

D2B fibre optic interface designed to retain the use of the original fibre optic audio amplifier (Usually Bose systems in cars built between 1998 and 2005) in Mercedes cars to allow the fitting of an aftermarket radio upgrade.The interface connects at the back of the radio, it takes the phono au..