Mazda CX-7

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

ISO T cable for Ford Ranger & Mazda cars.This cable fits behind the car radio and is used as a break-out cable to enable the audio of the hands-free kit to play through the cars speakers.Use with Parrot CK3000, CK3100, CK3200 LS, MKI9000, MKI9100, MKI9200If using on BOSE cars use the..

DIN Antenna Adaptor. For Aftermarket Radio With DIN Antenna ConnectorAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN versions. Antenna Aerial Adaptor, convert..

Connects2 T-Harness SOT Leads are primarily used when installing Parrot Bluetooth Car kits but can also be used to install other bluetooth devices and hands free kits into car. SOT lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the hand..

Mazda car audio interface cable with power and speaker ISO connections allowing use of original steering wheel buttons with a new aftermarket head-unit. Use with Mazda cars made after 2000.Does not allow access to trip display, clock or fader control that is on some newer Mazda cars.Wha..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

CTAMPPASSTHROUGHThe CTAMPPASSTHROUGH is an amplifier retention adapter which converts the new head unit’s high-level audio output to a low-level audio signal which will work with the vehicle’s original amplifier (reduces the output volume from the aftermarket stereo to the factory am..

Package IncludesPioneer Class D 4 Channel Multi Channel Car Amplifier 400W Parrot SOT T-Harness Adaptor LeadCompact 4 Channel Power.An amplifier shouldn’t take up too much space, especially in your car. That is why this Class-D amp might just be what you are looking for...

This adapter allows you  to retain the use of the original reverse camera when fitting an aftermarket head unit.This harness can also be used to add an aftermarket camera to the original head unit.the Original camera  needs a 6V feed and not a 12V so this must be used with item 10-671 ..

ZXMPM1 is a Plug and Play power-up kit made for Mazda (for a full model list please view Vehicle Applications). The ZXMPM1 power up kit consists of a variety of technology designed to improve the overall audio output of a vehicle. The ZXMPM1 includes a ZXM500.4 Amplifier and ZXMISOT2 ISO-T harness. ..

This cable converts the cars existing aerial plug to an aftermarket DIN type used by most car radio manufacturers.Honda car radio antenna antenna cable adapter for cars made after 2006 with amplified antenna.  Also fits some later model Holden, Isuzu, Mazda and Suzuki carsAerial Adapto..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

Patch lead for use with 20-XXX-SWC ISO steering wheel control cables to convert from 2 wire learning to 3.5mm jack.Use with self learning programable aftermarket units like Blaupunkt, Grundig or Road Angle. Also for some Kenwood, JVC and Sony units using their "CUSTOM" setting for stee..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Radio Replacement Kit, allows the fitment of a Single / Double DIN aftermarket headunit to the selected vehicle. This kit includes Fascia, Steering Wheel Interface and Aerial Adaptor.Package Includes:Fascia Panel Adaptor (Double or Single Din Installation) (Black) Steering Wheel Interfa..

Enables addition of an aftermarket NTSC reversing camera to the original Mazda screen. suitable for various Mazda vehicles from 2006- 2014  that have the 4 pin camera input connector. Some vehicles may require programming to activate the reverse camera function. Contact your Mazda spec..

This Cable allows you to connect a Chinese aftermarket car radio with European ISO connectors to the cars wiring using the original connectors in the car.This cable will retain the use of the steering wheel controls when fitting an aftermarket head-units with resistive programmable steering cont..

Connects2 T-Harness SOT Leads are primarily used when installing Parrot Bluetooth Car kits but can also be used to install other bluetooth devices and hands free kits into car. SOT lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the hand..