Mazda Bongo

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

ISO T cable for Ford Ranger & Mazda cars.This cable fits behind the car radio and is used as a break-out cable to enable the audio of the hands-free kit to play through the cars speakers.Use with Parrot CK3000, CK3100, CK3200 LS, MKI9000, MKI9100, MKI9200If using on BOSE cars use the..

Radio Replacement Kit, allows the fitment of a Single DIN aftermarket headunit to the selected vehicle. This kit includes Fascia, and Wiring Harness.Package Includes:Single Din Stereo Fascia Pocket Wiring HarnessPlease Note:This kit will turn the double din sized aperture into..

Radio Replacement Kit, allows the fitment of a Double DIN aftermarket headunit to the selected vehicle. This kit includes Fascia, and Wiring Harness.Package Includes:Double Din Fascia Adaptor Wiring HarnessPlease Note:For Double din branded stereo installation. China branded s..

A pair of premium high-end BLAM 570RS (5 X 7 INCH) 2-Way component speakers.570 RS 2-way (5 x 7’’) component system Integrated 6 dB/oct cross-over Sensitivity 94 dB Power handling Max: 120W Nominal Power: 60 (RMS) Frequency Range: 75Hz – 20kHz 20mm soft dome tweete..

Car audio metal cage kit and trim 113mm high. Needed for aftermarket head-units that do not come with cage kits.This kit is designed  as a replacement to the metal cage kit that is usually supplied with your new aftermarket double din head-unit or navigation system.It is used in standar..

Car radio lead for Mazda cars. Connects the new radio to the cars original connector These cars have a one piece connector behind the radio.{ vehicle_compatibility }For cars with BOSE use with item 20-273Harness AdaptorsConnect the head unit to the original radio connector w..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

Speaker adapter cables;  used connect the aftermarket speakers.Please make sure that is the correct Speaker Harness Adaptor for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the shape of adaptor in the pictu..

Mazda (2010>) - DIN Antenna Adaptor With Phantom Power Supply. For Aftermarket Radio With DIN Antenna Connector. Converts car specific antenna connector to a universal aftermarket connectorAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit ..

Car radio lead for Mazda cars. Connects the new radio to the cars original connector{ vehicle_compatibility }Harness AdaptorsConnect the head unit to the original radio connector without the need to cut any of the existing wiring.TECHNICAL NOTECAR AUDIO FITTING ACCESSORIES ARE..

ISO T cable for Mazda and Ford Cars.This cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit. Use when fitting handsfree car kits.This cable fits behind the car radio and is used as a break-out cable to enable the audio of the hands-free kit to play thr..