Lexus RX

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

A pair of premium high-end BLAM 690RS (6 X 9 INCH) 2-Way component speakers.System includes two 6»x9» woofers, 2 tweeters with flush-and surface-mount hardware included, and 2 external in-line 6 dB/Oct. high-pass crossovers with adjustable tweeter level 0 Db or -3 dBMax power ..

A pair of premium high-end BLAM 690RC (6 X 9 INCH) coaxial speakers.This system includes two 6"x9" woofers, with coaxial 25mm (1") soft dome tweeters and two integrated 6 dB/octave crossovers.The BLAM 690RC are designed to provide incredible performance. Because of their high ..

ZDST6CXExperience premium audio quality in your Toyota with the ZDST6CX Toyota 180W Speaker Upgrade Kit. Designed to elevate your driving experience, this high-quality speaker kit is compatible with a variety of Toyota models (refer to vehicle applications for specific compatibility). The ZDST6C..

Amplifier bypass cable for Lexus IS 200,GS430,, LS430, RX300.  Allows you to connect a new aftermarket radio directly to the cars speakers after bypassing the original amplifier which is behind the passenger glovebox.Fots cars with Lexus Amplifier On RX300 the amplifier is behind the rear..

Complete fitting kit to install a Single/ Double DIN head unit and retain the original steering wheel controls in Lexus RX (2003-2009) vehicles with factory fitted Mark Levinson Navigation systems. This fitting kit will also retain use of the top screen for both navigation and air con visualisation ..

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Includes ISO power to connect the car to the aftermarket head-unit. This steering wheel controls interface does not include speaker wiring and is designed for use with an amplifier by..

Lexus Antenna Adaptor. For Aftermarket Radio With DIN Antenna ConnectorAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN versions. Antenna Aerial Adaptor, conve..

Provide a full sound upgrade to your Toyota front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. This kit fits various Toyota vehicles including Alphard, Auris, Avensis, Hilux, RAV4 and Lexus RX, Daihatsu, Scion, Subaru. Please see our compatibility list for more cars ..

Complete fitting kit to install a Single/ Double DIN head unit and retain the original steering wheel controls in Lexus RX (2003-2009) vehicles with factory fitted Mark Levinson Navigation systems. This fitting kit will also retain use of the top screen for both navigation and air con visualisation ..

This cable allows you to add an aftermarket back-up NTSC camera to various Lexus cars (2012 Onwards) with GEN7/GEN8/GEN9 Media-Navigation Systems.Only suitable for 59 pin and 16 pin connectionES series cars of 2012-2018 MY are not supported!..

40 pin camera adapter cable to allow you to add an aftermarket rear view NTSC camera to OEM monitors on Toyota Prius/ Lexus RX models with MFD GEN5 multi-displays.Only suitable for NTSC camerasThis cable allows you to connect rear view cameras in Toyota / Lexus cars with OEM multimedia s..

Retains the top screen on all Lexus RX (XU30) built between 2004 - 2006 and models built between 2007 - 2009 with navigation.Retains use of the top screen for both navigation and air con visualisation after an after market radio has been fitted. For models with a 12 pin plug in the original radi..

Provide a full sound upgrade to your Toyota front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. This kit fits various Toyota vehicles including Alphard, Auris, Avensis, Hilux, RAV4 and Lexus RX. Please see our compatibility list for more cars that can benefit from thi..

A pair of Speaker adapter cables used to connect after market speakers to the original loom on Lexus.Please make sure that is the correct Speaker Harness Adaptor for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if ..

A pair of front or rear door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 165 mm Installation cutout: 148 mm Ring outside: 166 mm Ring heigh..

Retains steering wheel controls and OEM amplifier when replacing the radio For cars with JBL premium sound systemsThe loose blue wire is to be connected to the amp turn on wireSPECIAL ORDER ITEMWhat's Included23-224-SWC Steering Control Adaptor Stereo Patch Lead..

Lexus radio antenna cable adapter  for converting the original car cable to use with aftermarket head units.This cable converts the car radios existing aerial plug to an aftermarket DIN type used by most car radio manufacturers.For Alpine Radios or others with ISO plug use converter 21-..

Amplifier bypass cable for Lexus RX (XU30) built between 2004 - 2006 with original Mark Levinson Sound System Allows you to connect a new aftermarket radio directly to the cars speakers after bypassing the original amplifier which is under the rear seat.Not suitable for later 2007-2009 Lexus ..

Provide a sound upgrade to your Daihatsu, Lexus, Scion, Toyota front or rear doors with our 165mm (6.5 inch) speaker upgrade fitting kit.This kit fits various Toyota vehicles including Alphard, Auris, Avensis, Hilux, RAV4 and Lexus RX. Please see our compatibility list for more cars that can ben..