Land Rover Freelander

Reverse Gear Car Radio Mute Relay CableSpecial relay to mute audio when reversing to allow parking tones to be heard clearly.This relay is designed for aftermarket radio fittings where a parking sensor retention interface has been fitted. This relay will use a positive reverse gear signal t..

New style connector ISO T cable for Land Rover Cars.This cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit. Use when fitting handsfree car kits.This cable fits behind the car radio and is used as a break-out cable to enable the audio of the hands-free..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

The ISO-T Harness SOT lead (SOUND ON TOP) is the perfect accessory when installing an aftermarket amplifier. The ISO-T Harness installed between the amplifier and vehicle, taking high-level input signal from the car and passing it through the amplifier and sending it to the speakers. The SOT leads a..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fascia Note..

Land Rover Stereo Replacement Kit, allows the fitment of a Single DIN aftermarket headunit to the selected vehicle. This kit includes Fascia, Wiring Harness and Aerial Adaptor.Kit Includes:Single Din Fascia (Black) Frame & Pocket Wiring Harness Aerial AdaptorsFascia Ada..

Replacement car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket versionFits Land Rover - Discovery III (LR3) , Land Rover Freelander II (L359) , Land Rover Range Rover Sport (L320).Some Range Rover Sport models will have a gap along..

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Provides power and speaker connections from the car.Suitable for Landrover Discovery II, Freelander I and Rover 75 car models (With BMW round pin wiring){ vehicle_compatibilit..

17 pin BMW ISO hands-free T harness . Also fits Rover and Land Rover, Mini models made with BMW wiring connectors For use with Handsfree car kits that have ISO Mute cables.This cable fits behind the car radio and is used as a break-out cable to enable the audio of the hands-free kit to play thro..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.This Fitting Kit incl..

Connects2 T-Harness SOT Leads are primarily used when installing Parrot Bluetooth Car kits but can also be used to install other bluetooth devices and hands free kits into car. SOT lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the hand..

Discovery 3 and Range Rover Sport with Harmon Kardon (WITHOUT TOP DISPLAY) Car Audio Steering wheel interface and iso connectors allowing use of original buttons with a new aftermarket head-unit.NOT SUITABLE FOR CARS WITH ORIGINAL ALPINE PREMIUM SOUND SYSTEM OR HARMAN/KARDON LOGIC 7 AMPLIFIED ..

Steering wheel control interface for Landrover Freelander cars, facelift models 2003 - 2006. Allows you to change the original head unit in the car with an after market unit and retain the use of the steering wheel audio controls.Includes amplifier turn on for Harmon Kardon models{ vehicle_c..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fitting A..

Package IncludesPioneer GM-DX104 4 Channel Class D Bridgeable Car Amplifier 400W InCarTec ISO Mute SOT Cable{ vehicle_compatibility }GM-DX104Compact, space saving, easy to install micro 4-Channel amplifier (400 W) featuring High Resolution Audio, Class-D Technology and co..

Freelander 2, Discovery 3 and Range Rover Sport with standard audio system. Car Audio Steering wheel interface and iso connectors allowing use of original buttons with a new aftermarket head-unit.For Freelander with Parking sensors use item 25-518-PDC in addition to this interface.NOT SUIT..

Landrover Freelander (03-06) and Discovery II (02-04) fitted with Original Becker Traffic Pro SAT NAV. Also fits Rover 45 (02>) Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. Provides power and speaker connections from the ca..

This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector.The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is..

Car Audio Stereo Installation kit for installing a new after market double din headunit into your Landrover. This is complete kit including Fascia Trim Panel, Steering Control Interface for Volume Controls on Steering Wheel, and Aerial Adaptor.Package Includes:Double Din Fascia (Black)&nb..