Jeep Grand Cherokee

Phoenix Gold ZDT-CH1 T-HarnessUpgrade your vehicle’s audio with our T-Harness for Chrysler, Dodge and Jeep vehicles from 2007 and forward. Our plug-and-play solution makes it easy to upgrade your audio by integrating seamlessly with our amplifiers. Built for a hassle-free installation..

Chrysler/Jeep Fitting kit to install after market CD Stereo head unit.Package Includes:Fascia Panel Surround (Black) Wiring Harness AdaptorFascia AdaptorThis adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for hea..

A pair of front or rear door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if you..

CANBUS steering control and Amplifier Turn On interface for Chrysler, Dodge and Jeep vehicles.Switches on the original amplifier, retains the use of the steering wheel controls and give speed pulse and reverse gear CAN outputs.This interface connects to the CANbus wires at the back of the ra..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fitti..

Replacement car audio fascia to enable you to change the original radio in the car to a single DIN aftermarket versionFits various Chrysler, Dodge, Jeep & Lancia vehiclesCOLOUR: MATT BLACKCar Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio ..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

A pair of front or rear door car speaker adapter panels for 165mm speakers. MDF panels for Jeep Grand Cherokee 2010> cars to fit 165mm speakers to the front and rear doors. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Techni..

Cable to connect Chrysler, Dodge, Jeep car  to an after market European car radio with ISO style connectors. (use for cars without OEM amplifiers and without Steering wheel controls) Use 29-630 for cars with steering controls.Fit most Chrysler Jeep and Dodge models between (02-08) with stan..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Package IncludesPioneer SPH-DA150BT Mechafree 6.8" Capacitive Touchscreen Apple CarPlay / Android Auto Bluetooth Stereo Double Din Fascia Adaptor With Side Brackets Steering Control and Amplifier Turn On Interface Fakra to DIN Antenna Adaptor Stereo Patch Lead{ vehicle_comp..

Amplifier bypass cable. Allows you to connect a new aftermarket radio directly to the cars speakers after bypassing the original amplifier.Chrysler Voyager and some Cherokees made between 2005 and 2007 had a data bus protocol called J1850 to turn the car amplifier on and off. Removing the origin..

Cable to connect Chrysler Jeep & Dodge cars made after 2007 with new style radio connector to after-market European car radios with ISO style connectors.Fits  models (07>) with standard audio and without amplifier. These cars are all CAN bus cars and have no 12V ignition feed at the..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Phoenix Gold ZDT-FCA2 T-HarnessUpgrade your vehicle’s audio with our T-Harness. Our plug-and-play solution makes it easy to upgrade your audio by integrating seamlessly with our amplifiers. Built for a hassle-free installation, with everything you need included, no cutting or splicing..

Complete stereo upgrade kit to install a single or double DIN aftermarket radio and retain the use of the steering wheel controls in Chrysler, Dodge and Jeep vehicles from 2005-2008.Package IncludesSingle and Double Din Fascia Adaptor Steering Control And Amplifier Retention Interface ..

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

Amplifier bypass cable for cars made after 2009. Allows you to connect a new after-market car radio directly to the cars speakers.Includes crossovers.For some Chrysler models (08>) with original amplifier...