Ford Cougar

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

Fakra to Din Antenna Aerial Adaptor, Suitable for Aftermarket Radio With DIN Antenna Connector. Converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head..

Package IncludesFocal Inside Impulse 4.320 Compact 4 Channel Car Amplifier 400 watts Focal Inside IW-FOR-YISO-V2 Adaptation ISO Cable Harness For Ford{ vehicle_compatibility }Compact 4-Channel Digital AmplifierGive your head unit a breath of fresh air. Head unit..

IW FORD Y-ISO Harness V2 ISO Harness CableThe Focal Inside IW FORD Y-ISO HARNESS V2 car radio adapter cable is designed for the compact IMPULSE 4.320 4-channel amplifier. It connects to your Ford's original car radio and allows you to connect Focal Inside extension cables quickly and ea..

Black Fakra to ISO & DIN Aerial Adaptor, converts car specific antenna connector to a universal DIN or ISO connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO an..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Speaker adapter cables;  used connect the aftermarket speakers.Please make sure that is the correct Speaker Harness Adaptor for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the shape of adaptor in the pictu..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Ford ISO T-HarnessThe ISO-T Harness SOT lead (SOUND ON TOP) is the perfect accessory when installing an aftermarket amplifier. The ISO-T harness installed between the amplifier and vehicle, taking high-level input signal from the car and passing it through the amplifier and sending it to the spe..

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

A pair of front or rear door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical InformationSpeaker: 165 mm Panel cut out: 147.5 mm outer diameter: 216.5 mm x 160.5 m..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThese side bars are made to replace the OEM radio on a range of European Fords built between approximately 1995 and 2005. These are distinguishable by being just slightly smaller..

Complete fitting kit to install a single DIN head unit and retain the original steering wheel controlsFor Alpine head units an additional antenna adapter may be needed, part number 21-101Complete fitting kit to install a single DIN head unit and retain the original steering wheel controls ..

Standard two prong radio release keys used on Blaupunkt, Grundig, VDO, Philips style radios.STEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent ster..

Ford Fitting Kit Includes:Fascia Panel Black Surround & Support Bracket Wiring Harness Aerial Adaptor Stereo Removal KeysPlease Note:The image you see is what you will have fitted in your car then this product is correct. If you have a different stereo then this prod..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Ford Radio ISO LeadFor Ford cars fitted with the RDS2007 original radio.  This cable includes the power plug fitted behind the radio  and SPEAKERS ( fitted at the original amplifier).This cable is an amplifier bypass cable ( it allows you to drive the cars speakers directly from y..

This complete Single Din Radio Replacement Kit, allows the fitment of an aftermarket headunit to the selected vehicle. The kit includes fascia, steering stalk controls, removal keys and aerial connections.Ford Fitting Kit Includes:Fascia Panel Adaptor (Black) Steering Wheel Interface ..