Fiat Scudo

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

Antenna adapter cable for cars with ISO connectors that have amplified original antennas.This cable converts the cars existing ISO aerial plug to an aftermarket DIN type used by most car radio manufacturers. It also provides a power feed to give 12v from the car radio to the cars amplified ante..

This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector.The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is..

Suitable for the removal of all ISO Radios which have 2 or 1 square or round slots/holes on each side of the stereo.These keys are designed to remove the original unit from the vehicles: FIATWe try to provide upto date information. If you are unsure about the model number please feel free ..

A pair of front door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical InformationLoudspeaker: 165 mm Installation cutout: 145 mm Ring outside: 171.6 mm Ring heig..

A pair of front door car speaker adapter panels for 165mm speakers. These panels allow you to add quality aftermarket speakers to the vehicle.Technical DataLoudspeaker: 165 mm Installation cutout: 145.5 mm Ring outside: 234.5 mm x 208 mm Ring height: 21.2 mm - 32 mm..

Car audio metal cage kit and trim 103mm high. Needed with some double din fascias that do not fit the normal 113mm cages supplied with aftermarket head-units.This kit is designed to replace the metal cage kit that is usually supplied with your new aftermarket double din head-unit or navigation s..

For Fiat and Abarth, Alfa Romeo, Chrysler, Citroen, Lancia, Peugeot cars that do not have an ignition power supply in the factory harness. This cable includes the power and speaker supply and provides an ignition supply from the cars CAN bus data system when the key is in the accessory position. ..

URGENT NOTE: PLEASE CONTACT US PRIOR TO PURCHASING THIS ITEM, EMAIL US A PICTURE OF YOUR ORIGINAL STEREO AND CONFIRM THE MAKE, MODEL AND YEAR OF YOUR VEHICLE.Upgrade your Vehicle with a modern 9-inch touchscreen multimedia receiver whilst retaining factory vehicle functions and maintaining an ..

Cable to convert Citroen/ Fiat/ Peugeot & Toyota cars with Quadlock connector to a European car radio with ISO connectors.This cable has a loose wire for connecting to an ignition source in the car as their is no traditional + 12v key in ignition supply behind radio. The car has CAN bus data..

Provide a full sound upgrade to your Fiat front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. This kit fits various PSA Groupe vehicle models. Please see our compatibility list for more cars that can benefit from this upgrade kit.  This speaker upgrade kit offers..

Package IncludesPioneer 17cm 6.5" 2-Way Coaxial Car Speakers Speaker Adaptor PlugsIt Just Got Easier to Upgrade your Genuine OEM Sound.Upgrade the original sound system of your car. Our A series line up can give you the easy to install sound upgrade solution that you have bee..

Speaker Adaptor Plugs. Converts OEM Plugs To Standard Aftermarket Speaker Connectors.Please make sure that is the correct Speaker Harness Adaptor for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the shape of ada..

Package Includes:JL Audio C1-650x 6.5" 16.5cm 2 Way Yellow Cone Car Speakers 165mm Speaker Adaptor Panels Speaker Adaptor Cables Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker Kit{ vehicle_compatibility }C1-650xCoaxial Speaker System: 6.5-inch ..

Fakra to ISO Antenna Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN versions..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

AUX In Retention LeadKeeps original  USB and AUX  sockets on Fiat  and Alfa cars with Blue & Me system. Allows you  to maintain the cars existing AUX socket and use it with a new aftermarket head-unit. This unit uses the cars original housingContains special PCB whic..

Package Includes:Double Din Fascia Panel (Black) Wiring Harness Aerial AdaptorFascia AdaptorThis adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are..

Provide a full sound upgrade to your Jaguar front doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. This kit fits various Citroen, Fiat, Peugeot, Toyota, Vauxhall vehicle models. Please see our compatibility list for more cars that can benefit from this upgrade kit.  This sp..

Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in Citroen, Fiat, Peugeot, Toyota and Vauxhall vehicles with a standard radio system.Package IncludesDouble Din Fascia Adaptor Panel (Matt Black) Steerin..