ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..
Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..
These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fascia Note..
Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..
Designed to fit any 165mm speaker, this pair of adjustable speaker baffles creates a flexible seal around the back of the speakers, protecting them from water that gets inside doors and interior panels. Additionally it provides a barrier stopping interference between sound from the front and rear of..
This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..
Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..
Dacia Radio ISO LeadAudio cable for Dacia cars made after 2012 Converts harness to female ISO connectors for connecting a after-market European car radio.
Use for cars with the standard audio system without Steering wheel control. Harness AdaptorsConnect the head..
These new adapters have both Male DIN and ISO connections eliminating the need to stock both DIN and ISO products, this is a must for every installer.Water Blue Fakra Antenna AdaptorAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aft..
A pair of speaker adapter cables for various Dacia Dokker, Lodgy, Logan, Duster and Sandero vehicle models.
Use to fit new aftermarket speakers without needing to cut off the original speaker connectors.Please make sure that is the correct Speaker Harness Adaptor for your car by firstly check..
Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..
Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Seco..
A pair of front or rear door car speaker adapter panels for 130mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataSpeaker: 130 mm
Panel cut out: 115.5 mm
Outer diameter: 145.5 mm
Ring height: 2..
Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version
This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.
Fasc..
Complete stereo upgrade kit to install a Double DIN aftermarket radio in select Dacia Duster, Dokker, Lodgy, Logan and Sandero car models without steering wheel controls.{ vehicle_compatibility }Package IncludesDouble Din Fascia Adaptor (MATT BLACK)
Car Radio Replacement ISO Adaptor..
Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..
Dacia Speaker Adaptor Plugs. Converts OEM Plugs To Standard Aftermarket Speaker ConnectorsPLUG IN VEHICLE MUST LOOK LIKE THISPlease make sure that is the correct Speaker Harness Adaptor for your car by firstly checking to see if your make, model and year of car is listed in the advert...
Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in select Dacia Duster, Dokker, Lodgy, Logan and Sandero car models.{ vehicle_compatibility }Package IncludesDouble Din Fascia (Matt Black)
Steering Wheel Control ..