Chrysler Sebring

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Replacement car audio fascia to enable you to change the original radio in the car to a single DIN aftermarket versionFits various Chrysler, Dodge, Jeep & Lancia vehiclesCOLOUR: MATT BLACKCar Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio ..

Speaker adapter cables used to connect after market speakers to the original loom on multiple Chrysler, Dodge, Jeep and Lancia models.May not fit all versions of every vehicle. Some amplified and named sound systems such as BOSE, Boston or Infinity have different speakers with different connecti..

Chrysler Jeep audio connector to ISO for European after-market car radios. Non amplified carsFits all non amplified models before 2002.Harness AdaptorsConnect the head unit to the original radio connector without the need to cut any of the existing wiring.TECHNICAL NOTECAR AUD..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

Chrysler to ISO Antenna Adaptor for aftermarket radio with ISO AntennaConnector, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna ..

Connects2 T-Harness SOT Leads are primarily used when installing Parrot Bluetooth Car kits but can also be used to install other bluetooth devices and hands free kits into the car. SOT lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the ..

Chrysler Fitting kit to install after market CD Stereo head unit.Package Includes:Fascia Panel Surround (Black) Wiring HarnessFascia AdaptorThis adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit instal..

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket version This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. Fits..

A pair of front or rear door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if you..

Use this cable to retain an original fitment camera when fitting a new head unit.Ford Chrysler, Dodge, Jeep and RAM cars and trucks with original equipment reverse camera which use a 22 pin plug. Check vehicle before ordering for this plug, cars within these years had multiple original radio opt..

Cable to connect Chrysler Jeep & Dodge cars made after 2007 with new style radio connector to after-market European car radios with ISO style connectors.Fits  models (07>) with standard audio and without amplifier. These cars are all CAN bus cars and have no 12V ignition feed at the..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fitting Accessor..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Connects2 T-Harness SOT Leads are primarily used when installing Parrot Bluetooth Car kits but can also be used to install other bluetooth devices and hands free kits into the car. SOT lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the ..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fitting Accessor..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fitting Accessor..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fitting Accessor..