Chevrolet

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

Adapter cable to connect various General Motors cars and trucks to standard ISO connectors to enable the fitting of an aftermarket head unit.This adapter harness is designed to adapt from the original 44 Pin connector in the dashboard of various Chevrolet, Cadillac, Vauxhall, Opel, Holden vehicl..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionFits Chevrolet Corvette C6 (2005-2013), Hummer H3 (2006-2010) and Saab 9-7X (2004 - 2009).This kit uses side fixing brackets for a flush fit, so no radio cage is needed...

Car audio metal cage kit and trim 103mm high. Needed with some double din fascias that do not fit the normal 113mm cages supplied with aftermarket head-units.This kit is designed to replace the metal cage kit that is usually supplied with your new aftermarket double din head-unit or navigation s..

Upgrade your vehicle with our Connects2 CTK9 Complete Installation Kit designed to deliver a seamless, professional infotainment upgrade in one box. This all-in-one solution includes a premium 9" fascia, steering wheel control interface, and all essential accessories, allowing you to install a ..

Patch lead for use with 20-XXX-SWC ISO steering wheel control cables to convert from 2 wire learning to 3.5mm jack.Use with self learning programable aftermarket units like Blaupunkt, Grundig or Road Angle. Also for some Kenwood, JVC and Sony units using their "CUSTOM" setting for stee..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Sony 103mm High Double Din Radio CageSONY Radio metal Cage kit designed for 1 DIN chassis (182 x 103mm)Current Sony double DIN radios with single Din Chassis are supplied with a 2 DIN size cage (180mm x 113mm)This cage does not fit some common fascia’s such as Land Rover Discovery ..

Speaker adapter cable used to connect aftermarket speakers to the original connectors in the cars, These 2 way connectors fit many models of Japanese cars.Please make sure that is the correct Speaker Harness Adaptor for your car by firstly checking to see if your make, model and year of c..

GM Cars Single/Double DIN car audio fascia adapter panel to enable you to change the original radio in the car to a double din aftermarket version172mm x 98mmReplaces GM Delco oversize radio.This fascia kit has fixing brackets so no cage kit is needed.An additional pocket is included..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Provide a full sound upgrade to your front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. This kit fits various GM vehicles including Chevrolet, Holden, Vauxhall and Saab 9-4X  . Please see our compatibility list for more cars that can benefit from this upgrade ki..

This cable includes the power and speaker supply. If the car has steering wheel controls then use item 29-670 instead. Chevrolet car  to female ISO connectors for connecting a European car radio.Harness AdaptorsConnect the head unit to the original radio connector without the n..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single or Double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important F..

Connects2 CTKCV02 Double Din Radio Replacement Kit allows the fitment of a Double DIN aftermarket headunit to the selected vehicle. The kit includes double din fascia, Steering Wheel Interface, Antenna Adaptor and Universal Patch lead.{ vehicle_compatibility }Connects2 CTKCV02 Includes..

Car Audio Stereo Installation kit for installing a new after market Single din headunit into your Chevrolet. This is complete kit including Fascia Trim Panel, Steering Control Interface for Volume Controls on Steering Wheel and Aerial Adaptor.{ vehicle_compatibility }Package Includes:..

ZXMPGM1 is a Plug and Play power-up kit made for Chevrolet and Opel/Vauxhall vehicles (for a full model list please view Vehicle Applications). The ZXMPGM1 power up kit consists of a variety of technology designed to improve the overall audio output of a vehicle. The ZXMPGM1 includes a ZXM500.4 Ampl..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

The SOT mute lead features original quadlock connectors on each end of the wiring harness, plus a pair of male and female ISO connectors in the centre of the harness. This allows aftermarket accessories with ISO connectors (i.e Parrot bluetooth handsfree kits) to be plugged easily into the original ..