Chevrolet

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

Chevrolet, Nissan, Renault, Vauxhall radio replacement adapter cable, allows the fitting of an aftermarket car stereo upgrade by adapting the original 20 pin Nissan connector to standard aftermarket ISO connectors.This cable includes the power and speaker supply. If the car has steering wheel co..

Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Seco..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.This Fitting Kit Incl..

Car audio metal cage kit and trim 103mm high. Needed with some double din fascias that do not fit the normal 113mm cages supplied with aftermarket head-units.This kit is designed to replace the metal cage kit that is usually supplied with your new aftermarket double din head-unit or navigation s..

Recoil Level 3-Series RLX65 6.5 inch (165mm) 2-way full-range Coaxial SpeakersBoost your car’s sound with the RecoIL Audio RLX65 Level-3 Series 6.5-inch coaxial speaker system. Featuring a high-strength pressed paper cone, PEI dome tweeter with Neodymium magnet, nitrile rubber surround, an..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Sony 103mm High Double Din Radio CageSONY Radio metal Cage kit designed for 1 DIN chassis (182 x 103mm)Current Sony double DIN radios with single Din Chassis are supplied with a 2 DIN size cage (180mm x 113mm)This cage does not fit some common fascia’s such as Land Rover Discovery ..

Connects2 CTKCV02 Double Din Radio Replacement Kit allows the fitment of a Double DIN aftermarket headunit to the selected vehicle. The kit includes double din fascia, Steering Wheel Interface, Antenna Adaptor and Universal Patch lead.{ vehicle_compatibility }Connects2 CTKCV02 Includes..

Patch lead for use with 20-XXX-SWC ISO steering wheel control cables to convert from 2 wire learning to 3.5mm jack.Use with self learning programable aftermarket units like Blaupunkt, Grundig or Road Angle. Also for some Kenwood, JVC and Sony units using their "CUSTOM" setting for stee..

Provide a sound upgrade to your front or rear doors with our 165mm (6.5 inch) speaker upgrade fitting kit.Please see our compatibility list for more cars that can benefit from this upgrade kit.PLEASE NOTE: This fitting kit allows the fitting of new aftermarket speakers, the speakers themse..

ZXMPGM1 is a Plug and Play power-up kit made for Chevrolet and Opel/Vauxhall vehicles (for a full model list please view Vehicle Applications). The ZXMPGM1 power up kit consists of a variety of technology designed to improve the overall audio output of a vehicle. The ZXMPGM1 includes a ZXM500.4 Ampl..

Replacement car audio fascia to enable you to change the original radio in the car to a single or double DIN after market version{ vehicle_compatibility }For double DIN installation the middle bar of the fascia will need to be cutTo fit a double din radio a 113mm cage is required, howe..

Chevrolet Speaker Adaptor Plugs. Converts OEM Plugs To Standard Aftermarket Speaker ConnectorsPlease make sure that is the correct Speaker Harness Adaptor for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the sha..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Car Audio Stereo Installation kit for installing a new after market Single din headunit into your Chevrolet. This is complete kit including Fascia Trim Panel, Steering Control Interface for Volume Controls on Steering Wheel and Aerial Adaptor.{ vehicle_compatibility }Package Includes:..

Recoil RLM65 Level‑3 6.5″ Component Speaker SystemDrive your sound to the next level with the Recoil RLM65 Level-3 Series 6.5" Component Speaker System. With 80W RMS (160W peak), vibrant yellow pressed-paper cones and nitrile rubber surrounds deliver punchy mid-bass and fast response...