Bmw 5 Series

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Connects2 T-Harness SOT Leads are primarily used when installing Parrot Bluetooth Car kits but can also be used to install other bluetooth devices and hands free kits into the car. SOT lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the ..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

A pair of BLAM BMW hi-performance dedicated 200mm (8 inch) underseat subwoofers. Easily installed to replace the original 165 mm woofers in most pre 2011 BMW car models.FeaturesRigid and light fiberglass membrane Super powerful Neodymium motor Sensitivity (2.83V/1m) 88 dB Frequency..

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit. BMW 17 pin round pin steering wheel control interface.Some cars may have the Wave Casette head unit and the harman/kardon amplified audio system. If the cars has this set up and a quadlock con..

BMW ISO T-HarnessThe ISO-T Harness SOT lead (SOUND ON TOP) is the perfect accessory when installing an aftermarket amplifier. The ISO-T  harness installed between the amplifier and vehicle, taking high-level input signal from the car and passing it through the amplifier and sending it to th..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Fakra to Din Antenna Aerial Adaptor, Suitable for Aftermarket Radio With DIN Antenna Connector. Converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head..

Complete fitting kit to install a single DIN head unit and retain the original steering wheel controls in a BMW 5 series E39 with the round pin connector at the back of the radio.Package IncludesSingle Din Fascia Adaptor Panel (Black) Steering Wheel Control Interface (Including The BMW ..

For BMW cars built before 2002 with 17 pin Round connector and HARMON KARDON amplifier upgrade.Retains the use of the amplified audio system, including subwoofer.This cable has phono cable plugs for low level pre-out connection to the new car radio. This cable has a 12volt turn on wire. It ..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.Please check connection before ordering, this item is only for Round Pin connection type.&n..

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

Car Audio Stereo Installation kit for installing a new after market Double din headunit into your BMW. This is complete kit including Fascia Trim Panel, Steering Control Interface for Volume Controls on Steering Wheel, and Aerial Adaptor.{ vehicle_compatibility }Package Includes:Doubl..

Package Includes:FASCIA ADAPTOR (Black Without Pocket)  WIRING HARNESS AERIAL ADAPTORThis kit allows fitment in the following vehicle: BMWBMW 5 SERIES E39 : 1995 to 2000Please see pic to see what the connection should look like inside the vehicleFASCIA ADAP..

BMW sub-woofer adapter cable allows you to change the woofers underneath BMW front seats. Connects to original harness. { vehicle_compatibility }..

MDF panels for BMW E39 5 series cars to fit 165mm speakers to the front doors.  These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

Speaker adapter cables;  used to connect after market speakers to the original loom on multiple BMW models built after 2015May not fit all speakers on all versions of every vehicle. Some vehicles have mi-range speakers or tweeters with different connections. Please check your original speak..

Black Fakra to ISO & DIN Aerial Adaptor, converts car specific antenna connector to a universal DIN or ISO connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO an..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fascia Note..