Volvo All Models

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

Replacement car audio fascia to enable you to change the original radio in the car to a Single or Double DIN aftermarket version172mm x 98mmThis fascia kit is supplied with side mounting brackets for an easy fit and gives a flush mount finish. No cage kit is required.A pocket is included..

A pair of ISO standard speaker adapter cables for various Abarth, Alfa Romeo, Audi, Citroen, Chrysler, Fiat, Holden, Iveco, Jaguar, Lancia, Peugeot, Porsche, Seat, Skoda, Renault, Vauxhall, Volkswagen And Volvo car vehicle models.Use to fit new aftermarket speakers without needing to cut off the..

A pair of front door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, mo..

Volvo 850  Front door grills for 130mm aftermarket speakers. These grills allow you replace the cars original speakergrills.If needed use with panels 40-1073-130Use with any 130mm speakers or with our listed speakers SXE-1325SSold As A Pair..

ISO T cable for Volvo S60, S80, V70 , XC60 & XC70 made after 2007 . For cars with standard sound systems. Fitted behind the car radio.This cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit. Use when fitting handsfree car kits.This cable fits behin..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fitt..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.This Fitting Kit incl..

A pair of REAR SHELF car speaker adapter panels for 165mm speakers. A pair of car speaker adapter panels for 165mm speakers. Use with any 165mm speakers or with our listed speakers SXE-1725SThese panels allow you replace the cars original speakers with new improved quality aftermarket s..

Volvo to Male DIN car aerial antenna adapter cableGrey Volvo antenna connector to male DIN antenna adapter cable.This cable adapts from the grey Volvo antenna connector at the back of the original radio to a standard aftermarket DIN antenna connection to allow the fitting of an aftermarket r..

5 metre car audio speaker ISO extension cable. Consists of a 8 way brown female connector and a 8 way brown male connector.This cable is used for extending the speaker iso cable on a handsfree SOT lead or on a car audio head-unit. If it is used for extending a SOT lead to the rear of a car, you ..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fascia Note..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fitt..

Volvo ISO T-HarnessThe ISO-T Harness SOT lead (SOUND ON TOP) is the perfect accessory when installing an aftermarket amplifier. The ISO-T harness installed between the amplifier and vehicle, taking high-level input signal from the car and passing it through the amplifier and sending it to the sp..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...

For Volvo cars with premium sound and Dolby Pro-Logic systems. 4 channel  pre-out signal to the cars amplifier.This cable has phono  cable plugs for low level pre-out connection to the new car radio. This cable has a 12volt turn on wire.  Some head-units with very low voltage o..

ISO T cable for Volvo XC90 . Fitted under the drivers seat. Does not cut out centre speaker if fiited to car.  This cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit. Use when fitting handsfree car kits.This cable fits at the cars amplifier ..

Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Seco..