Skoda Yeti

Use to convert the original (Fakra DAB) antenna connector in a car to a female SMB (used on aftermarket head-units){ vehicle_compatibility }Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modi..

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

OEM Units With Horizontal Release KeysSTEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent stereo theft. This means that to remove one of these units..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.{ vehicle_compatibili..

Connects2 VAG Double Fakra to DIN Antenna Adaptor. Twin FAKRA to DIN Antenna Adaptor With Phantom Power Supply. For Aftermarket Radio With DIN Antenna Connector. Converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when r..

Connects2 INFODAPTER allows vehicle information such as Climate Control, Parking Sensors and Heated seats to be displayed on any aftermarket AV head unit. This information would usually be displayed on the original head unit and therefore would not be retained without the use of an INFODAPTER. The i..

ISO adapter harness for Volkswagen, Vauxhall, Holden, Seat, Skoda group vehicles with quadlock connectors at the back of the radio.This adapter harness is designed to adapt from the original quadlock style connector in the dashboard to a standard aftermarket ISO connector to allow the fitting of..

FLUSH FIT Car radio fascia adaptor panel to allow the fitting of an aftermarket single or double din car radio upgrade.The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.This FLUSH FIT fascia makes it..

ISO adapter harness for Volkswagen group vehicles with quadlock connectors at the back of the radio.This adapter harness is designed to adapt from the original quadlock style connector in the dashboard to a standard aftermarket ISO connector to allow the fitting of a new radio.This lead has ..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. If f..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.{ vehicle_compatibili..

Pioneer CD-SVW-UAR.007AE Integration Module for VAG carsCAN Bus Adaptor for SPH-EVO64DAB/SPH-EVO93DAB/SPH-EVO950DAB{ vehicle_compatibility }Interface to the Pioneer station with a UART connector that allows you to gain control from the steering wheel and transfer certain informa..

7-inch Installation Kit for VW platforms (MIB-PQ - Seat, Skoda and Volkswagen)The installation kit KIT-HALO-VW303 lets you perfectly integrate a 1DIN Alpine Halo system (INE-F904D, INE-F904DC, iLX-F905D, iLX-F115D) or 2DIN Head Unit such as the iLX-705D, INE-W720D or INE-W720DC into a compatible..

CTLOCBMV-4CHBMW, VW, Alfa Romeo, Audi, Mercedes, Seat and Skoda (Quadlock) 4 Channel Line Out ConverterWhether you're adding an aftermarket amplifier or DSP, our 4-Channel Line Output Converter ensures optimal performance with minimal installation hassle. With advanced signal processing..

This stereo upgrade fitting kit allows the fitting of an aftermarket Double DIN stereo head unit into Skoda Yeti car models with factory Balero stereos. As well as retaining the vehicle factory steering wheel controls, this kit includes a pre-wired CANbus interface allowing vehicle information such ..

Package IncludesSTINGER IE268E 6.8" Screen Wireless Apple Carplay / Android Auto, Bluetooth, DAB+ Stereo DAB Aerial Double DIN Facia Adaptor Panel Radio Replacement Steering Wheel Adaptor Interface Double Fakra to DIN Aerial Adaptor (Phantom Power) With Bullet Connector St..

Package IncludedFocal ISVW165 - 165mm 2 Way Component Speakers 240W Focal ICVW165 6.5" 16.5cm 2-Way VW Replacement Coaxial Speakers 240W Total Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker KitThe system is composed of a 2-way component kit ISVW165 for..

Phoenix Gold ZDT-QL1 T-Harness AdaptorUpgrade your vehicle’s audio with our T-Harness. Our plug-and-play solution makes it easy to upgrade your audio by integrating seamlessly with our amplifiers. Built for a hassle-free installation, with everything you need included, no cutting or s..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. There is an Aerial Adaptor also included with the Wiring Adapto..