Seat Toledo

Speaker adapter cables; used to connect after market tweeters to the original loom on various Volkswagen, Skoda and Seat models.Fits models built after 1996. Suitable for both front and rear tweeters. Pack contains a pair of cables (enough for two doors for example)May not fit all versions o..

Double Fakra to Male DIN aerial antenna adapter cable (With 12v phantom power)This antenna adapter cable adapts from the original Double Fakra connector in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade.This cable converts the original ..

Package IncludesInfinity REF-6532EX Reference 165 Watt 6.5" 2 Way Shallow Fit Coaxial Car Speakers 165mm Speaker Adaptor Rings Speaker Adaptor Plugs{ vehicle_compatibility }Accurate, High Performance SoundNew Reference speakers are designed to deliver Infinity’s s..

Complete stereo upgrade fitting kit to install a double DIN aftermarket radio in various Seat cars with hardwire ignitionPackage IncludesDouble DIN Facia Adaptor Panel Quadlock to ISO Radio Adaptor Harness, With Antenna Adaptor, Hardwire IgnitionFascia AdaptorThis adaptor will..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fitting A..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

CAN to UART Interface for VW platforms (MIB-PQ - Seat, Skoda and VW)The APF-X303VW is the latest generation of Alpine interfaces for Volkswagen platform vehicles (including Skoda and Seat) to connect an Alpine navigation or Digital Media Station seamlessly to your vehicle’s electronics / C..

Retain original Camera on Highline Volkswagen, Seat and Skoda cars with Volkswagen RNS510, RNS315, RCD510, Seat Trinax and Skoda Bolero or Columbus head units.Retains the original highline reverse camera with an aftermarket head unit. Moving guide lines are not retained.This Camera interface..

Connects2 INFODAPTER allows vehicle information such as Climate Control, Parking Sensors and Heated seats to be displayed on any aftermarket AV head unit. This information would usually be displayed on the original head unit and therefore would not be retained without the use of an INFODAPTER. The i..

Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Seco..

Fakra to Din Antenna Adaptor with Phantom Power Supply. This adapter converts car specific antenna connecter to a DIN aftermarket connector. Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. There is an Aerial Adaptor also included with the Wiring Adapto..

Designed For VW Platforms (Seat, Skoda And VW)Installation Pocket KTX-1DIN for KIT-7VWX300 Installation KitCompatibleiLX-F903D (Requires KIT-7VWX300)..

Package Includes:Fascia Panel (Black) Wiring Harness Aerial Adaptor Removal KeysFascia AdaptorThis adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Car radio fascia adaptor panel to allow the fitting of an aftermarket Double din Car radio upgrade. The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.{ vehicle_compatibility }This fascia kit uses sid..

Seat Speaker adapter cables. Used connect the aftermarket speakers to the original connectors in the car.Please make sure that is the correct Speaker Harness Adaptor for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

FLUSH FIT Car radio fascia adaptor panel to allow the fitting of an aftermarket single or double din car radio upgrade.The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.Use the supplied pocket with t..

Car radio fascia adaptor panel to allow the fitting of an aftermarket single or double DIN car radio upgrade.The fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio.Use the supplied pocket with the fascia ..