Seat Exeo

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Radio Removal Keys for Seat Vertical Release SlotsSTEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent stereo theft. This means that to remove one of..

CTLOCBMV-4CHBMW, VW, Alfa Romeo, Audi, Mercedes, Seat and Skoda (Quadlock) 4 Channel Line Out ConverterWhether you're adding an aftermarket amplifier or DSP, our 4-Channel Line Output Converter ensures optimal performance with minimal installation hassle. With advanced signal processing..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. There is an Aerial Adaptor also included with the Wiring Adapto..

Double Fakra to Male DIN aerial antenna adapter cable (With 12v phantom power)This antenna adapter cable adapts from the original Double Fakra connector in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade.This cable converts the original ..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Complete stereo upgrade fitting kit to install a Single/Double DIN aftermarket radio in Audi A4 (B7) (2005-2008) car models with Steering wheel controls and rear amplified sound systems.Package IncludesSingle / Double Din Fascia (Matt Black) Double Din Fitting Cage Quadlock CAN Steeri..

Speaker adapter cables;  used to connect after market speakers to the original loom on multiple Audi and Seat modelsFits most Audis built after 2002, the Seat Exeo (2008-2013) and the Seat Leon Mk3 (2013-2019)May not fit all versions of every vehicle. Some amplified and named sound syst..

Phoenix Gold ZDT-QL1 T-Harness AdaptorUpgrade your vehicle’s audio with our T-Harness. Our plug-and-play solution makes it easy to upgrade your audio by integrating seamlessly with our amplifiers. Built for a hassle-free installation, with everything you need included, no cutting or s..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. There is an Aerial Adaptor also included with the Wiring Adapto..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Audi quadlock to ISO radio adapter cable for rear amplified cars. Adjustable line-out converter for the rear amplifier This adapter harness has a built in CANbus ignition interfaceThis Quadlock to ISO adapter cable with CANbus ignition adapts from the original connector in the car, known as a qu..

Connects2 Fakra to DIN & ISO Antenna Adaptor with Phantom Power Supply, Converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna ..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Handsfree ISO T hraness for VW cars made after 2010 with newer style Quadlock connector also fit for Seat & Skoda Cars.Flying ignition for connection 12v IgnitionThis cable fits behind the radio and routes the phone audio through the front speakers.If the original radio connector &nb..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Audi / VW / Seat / Skoda & Porsche Quadlock cable to be used in conjunction with an ISO Mute harness normally supplied with the hands-free car kit.This cable has a flying lead for connection to an ignition supply. For a plug and play solution with CAN ignition use item 10-536-IGNThis cab..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..