Peugeot Partner

Package IncludesKenwood KFC-PS1797 PS Series 6.5" (17cm) 2-Way Coaxial Car Speakers Speaker Adaptor Plugs Kenwood KSC-PSW7EQ Car Audio  Active Compact Under Seat Subwoofer{ vehicle_compatibility }Kenwood KFC-PS1797 Performance Standard Series Speaker System17c..

Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls.Package IncludesDouble Din Fascia Adaptor Trim (Matt Black) 103mm high Double Din Cage Kit Steering Wheel Control Interface Fakra to Din Antenna Adap..

A pair of speaker adapter cables for various Citroen, Fiat, Peugeot, Toyota and Vauxhall vehicle models. Use to fit new aftermarket speakers without needing to cut off the original speaker connectors.{ vehicle_compatibility }Please make sure that is the correct Speaker Harness Adaptor..

CAN BUS steering wheel control and parking sensor retention interface for Citroen, Fiat and Peugeot cars with quadlock connectors behind the radio.This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new afterma..

Car Audio Stereo Installation kit for installing a new after market Double din headunit into your Peugeot. This is complete kit including Fascia Trim Panel, Steering Control Interface for Volume Controls on Steering Wheel, Aerial Adaptor and Removal Keys.Package Includes:Double Din Fascia..

Double Din / Single Din Radio Replacement Kit allows the fitment of a Double / Single DIN aftermarket headunit to the selected vehicle. The kit includes Steering Control, Stereo Removal Keys , and aerial connections. Package Includes:Steering Control Adaptor Aerial Adaptors Stere..

Car Stereo Installation kit for installing a new after market headunit into your vehicle. Installation Kit supplied With Wiring Harness, Stereo removal keys and Aerial Adaptor.{ vehicle_compatibility }Package Includes:Wiring Harness Adaptor Aerial Adaptor Stereo Removal Keys..

This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector.The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is..

Audio cable to convert Citroen/ Fiat/ Peugeot & Toyota cars with Quadlock connector to a European car radio with ISO connectors.Includes CANbus 12v accessory ignition supplyThe car has CAN bus data. The interface provides a key in ignition supply from the data.Harness Adaptors ..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.This interface will retain the use of the steering wheel audio controls with an aftermarket head unit by adapting the original vehicle connectors to standard aftermarket ISO connec..

This adapter is required when replacing your factory fitted radio with an aftermarket radio. It will convert the original vehicle power & speaker wiring connectors to a standard ISO connector. Simply plug one end of the adapter into your cars wiring harness and the other into your new radio...

PDC Parking Sensor Tone and Warning Chime Retention InterfaceCANbus interface to retain the original parking distance control (PDC) tones and other vehicle warning chimes that are lost when replacing the radio in various BMW, Citroen, Peugeot, Volvo and Ford cars.The original parking tones a..

Package Includes:Alpine 6-1/2"(16cm DIN) Coaxial 2-Way Speaker Speaker Adaptor PlugsAlpine SXE-1725S Features:Peak Power 220W RMS Power 40W Frequency Response: 60Hz-20kHz Sensitivity: 92dB/W/m Neodymium Magnet Mylar-Titanium Balanced Dome Tweeter\ Ferrit..

Adaptor cable to convert Stallantis vehicles with the 2016 onwards NAC radios to a standard ISO connector for fitting an aftermarket head unit.The harness has a built in CANbus interface that provides a key present ignition power supply to the radio, and and illumination output on most cars. Ins..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.This Fitting Kit Incl..

Package IncludedPhoenix Gold ZDSKPSA1 6.5″ (165mm) 2-Way Component Car Speaker Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker KitZDSKPSA1 2-Way Speaker Kit for Citroen, Peugeot and Opel/Vauxhall vehicles a 6.5-inch 2-way component speaker kit crafted to r..

Package Includes:1 x Pioneer 10cm 4" 2-Way Coaxial Car SpeakersFor better-sounding drives. Discover the renewed G-seriesThe improved G-series speaker range is specifically developed for premium and powerful audio, with excellent value for money. Their rigid design has been optimise..

CANbus steering wheel control and parking sensor retention interface for cars with quadlock connectors behind the radio.This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also pro..