Peugeot ION

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

These new adapters have both Male DIN and ISO connections eliminating the need to stock both DIN and ISO products, this is a must for every installer.Water Blue Fakra Antenna AdaptorAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aft..

Connects2 Head Unit Replacement Interface when installing an aftermarket head unit in vheicles that do not have a 12V ignition feed, such as CAN-BUS vehicles. The interface generates an ignition feed by sensing the voltage on engine cranking which then creates a stable, reliable 12V feed for th..

Connects2 Head Unit Replacement Interface when installing an aftermarket head unit in vheicles that do not have a 12V ignition feed, such as CAN-BUS vehicles. The interface generates an ignition feed by sensing the voltage on engine cranking which then creates a stable, reliable 12V feed for th..

Connects2 Fakra to DIN & ISO Antenna Adaptor with Phantom Power Supply, Converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna ..

CT27AA08 ISO to Din converts car specific antenna connector to a universal aftermarket connector. Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit and your vehicle has a ISO type aerial lead fitted. Aerial AdaptorAn Aerial ..

These new adapters have both Male DIN and ISO connections eliminating the need to stock both DIN and ISO products, this is a must for every installer.DIN & ISO Antenna Adaptor with Phantom Power SupplyAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitte..

Connects2 Head Unit Replacement Interface when installing an aftermarket head unit in vheicles that do not have a 12V ignition feed, such as CAN-BUS vehicles. The interface generates an ignition feed by sensing the voltage on engine cranking which then creates a stable, reliable 12V feed for th..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fascia Note..

Cable to convert Citroen/ Fiat/ Peugeot & Toyota cars with Quadlock connector to a European car radio with ISO connectors.This cable has a loose wire for connecting to an ignition source in the car as their is no traditional + 12v key in ignition supply behind radio. The car has CAN bus data..

Adaptation Cable for the IMPULSE 4.320 Compact 4-channel Digital AmplifierThe Focal Inside IW-PSA-YISO HARNESS head unit adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Citroën, DS Automobiles et Peugeo..