Peugeot Expert

Provide a sound upgrade to your front or rear doors with our 165mm (6.5 inch) speaker upgrade fitting kit.This kit fits various PSA Groupe vehicle models. Please see our compatibility list for more cars that can benefit from this upgrade kit.This fitting kit allows the fitting of new after..

The UNI-CHIME interface allows you to retain a vehicles original parking tones when upgrading to an aftermarket stereo. With an aftermarket audio system, certain features, like parking tones, can become lost via the CAN system. But with the application of the UNI-CHIME, this information can be re-in..

A pair of speaker adapter cables for various Citroen, Fiat, Peugeot, Toyota and Vauxhall vehicle models. Use to fit new aftermarket speakers without needing to cut off the original speaker connectors.{ vehicle_compatibility }Please make sure that is the correct Speaker Harness Adaptor..

CAN BUS steering wheel control and parking sensor retention interface for Citroen, Fiat and Peugeot cars with quadlock connectors behind the radio.This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new afterma..

Connects2 T-Harness SOT Leads are primarily used when installing Parrot Bluetooth Car kits but can also be used to install other bluetooth devices and hands free kits into the car. SOT lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the ..

Car Audio Stereo Installation kit for installing a new after market Double din headunit into your Peugeot. This is complete kit including Fascia Trim Panel, Steering Control Interface for Volume Controls on Steering Wheel, Aerial Adaptor and Removal Keys.Package Includes:Double Din Fascia..

Car Stereo Installation kit for installing a new after market headunit into your vehicle. Installation Kit supplied With Wiring Harness, Stereo removal keys and Aerial Adaptor.{ vehicle_compatibility }Package Includes:Wiring Harness Adaptor Aerial Adaptor Stereo Removal Keys..

This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector.The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is..

Audio cable to convert Citroen/ Fiat/ Peugeot & Toyota cars with Quadlock connector to a European car radio with ISO connectors.Includes CANbus 12v accessory ignition supplyThe car has CAN bus data. The interface provides a key in ignition supply from the data.Harness Adaptors ..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

This adapter is required when replacing your factory fitted radio with an aftermarket radio. It will convert the original vehicle power & speaker wiring connectors to a standard ISO connector. Simply plug one end of the adapter into your cars wiring harness and the other into your new radio...

Package IncludesPioneer TS-A1371F 5 Inch 13cm 3 Way Coaxial Car Speaker System (300W) 130mm Front Door Speaker Adaptors{ vehicle_compatibility }It Just Got Easier To Upgrade Your Genuine OEM Sound.Upgrade the original sound system of your car. Our A series line up can give yo..

PDC Parking Sensor Tone and Warning Chime Retention InterfaceCANbus interface to retain the original parking distance control (PDC) tones and other vehicle warning chimes that are lost when replacing the radio in various BMW, Citroen, Peugeot, Volvo and Ford cars.The original parking tones a..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Adaptor cable to convert Stallantis vehicles with the 2016 onwards NAC radios to a standard ISO connector for fitting an aftermarket head unit.The harness has a built in CANbus interface that provides a key present ignition power supply to the radio, and and illumination output on most cars. Ins..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.This Fitting Kit Incl..

CANbus steering wheel control and parking sensor retention interface for cars with quadlock connectors behind the radio.This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also pro..

A pair of front door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical InformationLoudspeaker: 165 mm Installation cutout: 145 mm Ring outside: 171.6 mm Ring heig..

Cable to convert Citroen/ Fiat/ Peugeot & Toyota cars with Quadlock connector to a European car radio with ISO connectors.This cable has a loose wire for connecting to an ignition source in the car as their is no traditional + 12v key in ignition supply behind radio. The car has CAN bus data..