Peugeot 4007

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

A pair of speaker adapter cables for various Citroen, Peugeot vehicle models. Use to fit new aftermarket speakers without needing to cut off the original speaker connectors.Please make sure that is the correct Speaker Harness Adaptor for your car by firstly checking to see if your make, model..

These new adapters have both Male DIN and ISO connections eliminating the need to stock both DIN and ISO products, this is a must for every installer.Water Blue Fakra Antenna AdaptorAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aft..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fascia Note..

Connects2 Fakra to DIN & ISO Antenna Adaptor with Phantom Power Supply, Converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna ..

CT27AA08 ISO to Din converts car specific antenna connector to a universal aftermarket connector. Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit and your vehicle has a ISO type aerial lead fitted. Aerial AdaptorAn Aerial ..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

These new adapters have both Male DIN and ISO connections eliminating the need to stock both DIN and ISO products, this is a must for every installer.DIN & ISO Antenna Adaptor with Phantom Power SupplyAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitte..

Package IncludesPioneer Class D 4 Channel Multi Channel Car Amplifier 400W InCarTec SATNAV ISO Mute SOT Cable{ vehicle_compatibility }Compact 4 Channel Power.An amplifier shouldn’t take up too much space, especially in your car. That is why this Class-D amp might just be..

Car radio fascia adapter panel to allow the fitting of an aftermarket single/ double DIN car stereo upgrade. Fits Citroen C Crosser (2007-2012) and Peugeot 4007 (2007-2012) car models This kit comes complete with a pocket and trim for Single DIN Installations.COLOUR: BLACKCut out bar and..

Steering wheel control interface for Mitsubishi Shogun  Outlander, Citroen C-Crosser and Peugeot 4007 vehicles with original fitted navigation head units.This interface will allow you to keep the use of the steering wheel audio controls when replacing the original head unit for an after mar..

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.Not suitable for cars with  original SAT NAVWhat's Included29-681 Steering Control Adaptor Stereo Patch LeadWorks with the following brandsAlpine Clarion ..

Audio cable for Citroen, & Peugeot car harness to female ISO connectors for connecting a after-market European car radio. Use for cars  with the standard audio system without Steering wheel control. This cable includes the power and speaker supply. If the car has steering wheel con..

Peugeot 4007 (with SAT NAV) car to female ISO connectors for connecting a European car radio. This cable includes the power and speaker supply.Harness AdaptorsConnect the head unit to the original radio connector without the need to cut any of the existing wiring.TECHNICAL NOTE..

For connecting a handsfree kit to the car original harness. Use with Handsfree kit or music streaming  deviceThis cable fits behind the car radio and is used as a break-out cable to divert the audio from the handsfree kit to the cars speakers. It is used in conjunction with the ISO mute cab..

For Citroen C Crosser cars & Peugeot 4007 with original SAT NAV. This cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit.This cable fits behind the car radio and is used as a break-out cable to enable the audio of the hands-free kit to play through the..

Adaptation Cable for the IMPULSE 4.320 Compact 4-channel Digital AmplifierThe Focal Inside IW-PSA-YISO HARNESS head unit adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Citroën, DS Automobiles et Peugeo..