Peugeot 207

Peugeot ISO T-HarnessThe ISO-T Harness SOT lead (SOUND ON TOP) is the perfect accessory when installing an aftermarket amplifier. The ISO-T harness installed between the amplifier and vehicle, taking high-level input signal from the car and passing it through the amplifier and sending it to the ..

Connects2 Car Stereo Installation kit for installing a new after market double din headunit into your Peugeot. Kit includes Fascia Trim Panel, and Steering Control Interface Adaptor. Fitting Kit IncludesDouble Din Fascia (Black) Steering Wheel Control Interface Fakra Antenna Adap..

Parking sensor buzzer retention interface. For cars that lose the parking sensor tones when the original radio is removed.The original parking tones and warning chimes in many cars are produced by the original radio and when an aftermarket radio is fitted these tones are lost. This CANbus interf..

Package IncludesPioneer Class D 4 Channel Multi Channel Car Amplifier 400W InCarTec Quadlock to ISO Mute SOT Cable{ vehicle_compatibility }Compact 4 Channel Power.An amplifier shouldn’t take up too much space, especially in your car. That is why this Class-D amp might ju..

Connects2 T-Harness SOT Leads are primarily used when installing Parrot Bluetooth Car kits but can also be used to install other bluetooth devices and hands free kits into the car. SOT lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the ..

The UNI-CHIME interface allows you to retain a vehicles original parking tones when upgrading to an aftermarket stereo. With an aftermarket audio system, certain features, like parking tones, can become lost via the CAN system. But with the application of the UNI-CHIME, this information can be re-in..

Package Includes:Wiring Harness Adaptor Aerial Adaptor Stereo Removal KeysSome Models may require fascia panel AdaptorPlease Note:Blue wire needs to be connected to the Remote Antenna or ignition supply wire (if rem ant wire not available) on back of car stereo.Wiri..

USB Retention CableKeeps original USB socket on Citroen, Kia, Hyundai, Peugeot & Toyota cars. Allows you to maintain the cars existing USB socket and use it with a new aftermarket head-unit. This unit uses the cars original housing. Works on all newer model Citroen / Kia / Hyundai / P..

Connects2 Car Stereo Installation kit for installing a new after market double din headunit into your Peugeot. Kit includes Fascia Trim Panel, and Steering Control Interface Adaptor. Fitting Kit IncludesDouble Din Fascia (Black) Steering Wheel Control Interface (Which Also Retains ..

CAN BUS steering wheel control and parking sensor retention interface for Citroen, Fiat and Peugeot cars with quadlock connectors behind the radio.This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new afterma..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Car audio metal cage kit and trim 113mm high. Needed for aftermarket head-units that do not come with cage kits.This kit is designed  as a replacement to the metal cage kit that is usually supplied with your new aftermarket double din head-unit or navigation system.It is used in standar..

Citroen / Fiat /  Peugeot Toyota & Vauxhall Quadlock cable to be used in conjunction with an ISO Mute harness normally supplied with the hands-free car kit.With flying lead to connect to +12 volt ignition.This cable fits behind the car radio and is used as a break-out cable to enabl..

This adapter is required when replacing your factory fitted radio with an aftermarket radio. It will convert the original vehicle power & speaker wiring connectors to a standard ISO connector. Simply plug one end of the adapter into your cars wiring harness and the other into your new radio...

Connects2 Fakra to DIN & ISO Antenna Adaptor with Phantom Power Supply, Converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna ..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fascia..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Radio Replacement Kit, allows the fitment of a Double DIN aftermarket headunit to the selected vehicle. This kit includes Fascia, Wiring Harness and Aerial Adaptor.Package Includes:FASCIA ADAPTOR (Black) Frame Only WIRING HARNESS AERIAL ADAPTORFASCIA ADAPTOR: This ..

Standard two prong radio release keys used on Blaupunkt, Grundig, VDO, Philips style radios.STEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent ster..