Nissan X-Trail

Phoenix Gold ZDT-NSN1 T-HarnessUpgrade your vehicle’s audio with our T-Harness. Our plug-and-play solution makes it easy to upgrade your audio by integrating seamlessly with our amplifiers. Built for a hassle-free installation, with everything you need included, no cutting or splicing..

The CTKNS19 is a full integration kit for the 2014-2016 Nissan X-Trail. The kit allows you to install an aftermarket head unit whilst retaining the vehicle’s four factory installed cameras, enabling 360-degree camera functionality through the new head unit’s display. The bespoke interfac..

24 Way connector and voltage adapter to keep the use of the original fitted reverse camera with an aftermarket head unit.NOT SUITABLE FOR BIRDS EYE 360 camera system Connect the purple wire to the new head-units 12V reverse signal wire, black to ground. The interface drops the volta..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Upgrade your vehicle with our Connects2 CTK9 Complete Installation Kit designed to deliver a seamless, professional infotainment upgrade in one box. This all-in-one solution includes a premium 9" fascia, steering wheel control interface, and all essential accessories, allowing you to install a ..

Package Includes:JL Audio C1-650x 6.5" 16.5cm 2 Way Yellow Cone Car Speakers 165mm Speaker Adaptor Panels Speaker Adaptor Cables Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker Kit{ vehicle_compatibility }C1-650xCoaxial Speaker System: 6.5-inch ..

ISO to ISO Amplifier Integration Interface4 channel adjustable ISO to ISO amplifier interface.Use to install a new radio in a car that has an original fit amplifier that takes a pre amplified audio feed.This interface converts the high level audio output of a new head unit to a low level..

A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. Features & BenefitsAllows you to upgrade to an aftermarket head unit whils..

Chevrolet, Nissan, Renault, Vauxhall radio replacement adapter cable, allows the fitting of an aftermarket car stereo upgrade by adapting the original 20 pin Nissan connector to standard aftermarket ISO connectors.This cable includes the power and speaker supply. If the car has steering wheel co..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Provide a full sound upgrade to your Renault front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. This kit fits various Dacia, Fiat, Mitsubishi, Nissan, Renault, Vauxhall vehicles including. Please see our compatibility list for more cars that can benefit from this upg..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Adaptation Cable for the IMPULSE 4.320 Compact 4-channel Digital AmplifierThe Focal Inside NISSAN Y-ISO HARNESS head unit adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Nissan original head unit and of Foca..

Patch lead for use with 20-XXX-SWC ISO steering wheel control cables to convert from 2 wire learning to 3.5mm jack.Use with self learning programable aftermarket units like Blaupunkt, Grundig or Road Angle. Also for some Kenwood, JVC and Sony units using their "CUSTOM" setting for stee..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Package Includes165mm Front Or Rear Door Speaker Adaptor Rings/Panels Speaker Adaptor Plugs Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Speaker Adaptor Plugs. Converts OEM Plugs To Standard Af..

Package IncludesPioneer GM-DX104 4 Channel Class D Bridgeable Car Amplifier 400W Parrot SOT T-Harness Adaptor Lead{ vehicle_compatibility }GM-DX104Compact, space saving, easy to install micro 4-Channel amplifier (400 W) featuring High Resolution Audio, Class-D Technology and c..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..