Nissan Note

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Adaptation Cable for the IMPULSE 4.320 Compact 4-channel Digital AmplifierThe Focal Inside NISSAN Y-ISO HARNESS head unit adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Nissan original head unit and of Foca..

Package IncludesPioneer TS-G1720F G-series 17cm 6.3/4 inch 2-Way 300W Coaxial Car Speakers 165mm Speaker Adaptor Speaker Adaptor PlugsNOT SUITABLE FOR MODELS WITH BOSE SPEAKERSPioneer TS-G1720F G-series 17cm 6.3/4 inch 2-Way 300W Coaxial Car SpeakersFor better-sounding d..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version When fitting a new head unit using the cars original mounting brackets, a small gap is sometimes left around the unit. This trim fills out the gap for a neater finish. Suitable fo..

Package IncludedPhoenix Gold ZDSKN1 6.5″ (165mm) 2-Way Car Speaker Upgrade Kit Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker KitZDSKN1Introducing the ZDSKN1 2-Way plug and play speaker kit system, specifically engineered for Nissan vehicles (please r..

A pair of front or rear door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 165 mm Installation cutout: 148.5 mm Ring outside: 166 / 181.5 mm ..

Upgrade the door speakers in your vehicle with this complete speaker fitting kit, featuring Recoil RLX65 6.5" (165mm) coaxial speakers. Designed to replace factory-fitted speakers, this kit includes mounting adapter rings and speaker wiring leads. Get deeper bass, clearer vocals, and improved t..

Package Includes165mm Front Or Rear Door Speaker Adaptor Rings/Panels Speaker Adaptor Plugs Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Speaker Adaptor Plugs. Converts OEM Plugs To Standard Af..

Connects2 T-Harness SOT Leads are primarily used when installing Parrot Bluetooth Car kits but can also be used to install other bluetooth devices and hands free kits into car. SOT lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the hand..

Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN versions. Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector. ..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Package IncludesJBL Stage1 62 (6.5") 2-Way Coaxial Car Speakers 400 Watt 165mm Front Door Speaker Adaptor Speaker Adaptor PlugsNOT SUITABLE FOR MODELS WITH BOSE SPEAKERS{ vehicle_compatibility }Stage1 62Take your audio experience to the next level with the JBL S..

Grey rectangle female antenna connector to male DIN car aerial antenna adapter cable.This cable adapts from the grey plastic rectangle antenna connector in the car to a standard aftermarket male DIN connector, this is used when fitting a new aftermarket radio.This is a passive antenna adapte..

Steering wheel control interface and adapter cable for Nissan Cube, Leaf, Micra K12C, Murano II, Note and X-Trail cars with 6 function audio controls on the steering wheel and a 20 pin Nissan connector at the back of the radio. (Does not include the i button)The interface and radio adapter cable..

CAM-NS2-RT Nissan​ Reverse Camera Retention InterfaceThe CAM-NS2-RT is a reversing camera retention lead specially designed for use on 2015 to 2019 Nissan Frontier and 2013 to 2017 Nissan Note. This easy to install plug and play system allows users to retain the use of the factory installed..

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.Suitable for Nissan Micra models K12 & C+C fitted with Single DIN Blau..

Package IncludesPioneer GM-DX104 4 Channel Class D Bridgeable Car Amplifier 400W SOT Cable to ISO Mute Harness Lead{ vehicle_compatibility }GM-DX104Compact, space saving, easy to install micro 4-Channel amplifier (400 W) featuring High Resolution Audio, Class-D Technology and ..

Package Includes165mm Front/Rear Door Speaker Adaptor Speaker Adaptor Plugs Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Speaker Adaptor Plugs. Converts OEM Plugs To Standard Aftermarket Speake..

A pair of speaker adapter cables for various Nissan car models. Use to fit new aftermarket speakers without needing to cut off the original speaker connectors.NOT SUITABLE FOR MODELS WITH BOSE SPEAKERSPlease make sure that is the correct Speaker Harness Adaptor for your car by firstly..