Nissan Micra

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

Package IncludesJBL Stage1 62 (6.5") 2-Way Coaxial Car Speakers 400 Watt 165mm Speaker Adaptor Panels Speaker Adaptor Cables{ vehicle_compatibility }Stage1 62Take your audio experience to the next level with the JBL Stage1 62 coaxial car speakers. These car speakers del..

Package Includes:JL Audio C1-650x 6.5" 16.5cm 2 Way Yellow Cone Car Speakers 165mm Speaker Adaptor Panels Speaker Adaptor Cables Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker Kit{ vehicle_compatibility }C1-650xCoaxial Speaker System: 6.5-inch ..

Package Includes2 Pairs x JBL Stage1 62 (6.5") 2-Way Coaxial Car Speakers 400 Watt 2 Pairs x 165mm Speaker Adaptor 2 Pairs x Speaker Adaptor Plugs{ vehicle_compatibility }Stage1 62Take your audio experience to the next level with the JBL Stage1 62 coaxial car speakers. ..

Grey rectangle female antenna connector to male DIN car aerial antenna adapter cable.This cable adapts from the grey plastic rectangle antenna connector in the car to a standard aftermarket male DIN connector, this is used when fitting a new aftermarket radio.This is a passive antenna adapte..

Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN versions. Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector. ..

Steering wheel control interface and adapter cable for Nissan Juke, Micra K13, Navara D40, Note, Qashqai and X-Trail cars to fit an aftermarket radio upgrade.The cable adapts from the 20 pin Nissan connector (the connector has a larger size terminal at either end of the connector) in the car to ..

Provide a sound upgrade to your Chevrolet, Dacia, Fiat, Mitsubishi, Nissan, Renault, Vauxhall front or rear doors with our 165mm (6.5 inch) speaker upgrade fitting kit.This kit fits various Renault vehicles including. Please see our compatibility list for more cars that can benefit from this upg..

Nissan (2006 Onwards) Handsfree SOT cable to ISO Mute harness This cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit.This cable fits behind the car radio and is used as a break-out cable to enable the audio of the hands-free kit to play through t..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionFits Nissan Micra K13 (2010-2017) car modelsThis kit has brackets included to mount the new radio for a flush fit, so no cage is required. If fitting a single DIN radio then..

A pair of front or rear door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 165 mm Installation cutout: 148.5 mm Ring outside: 166 / 181.5 mm ..

Package Includes165mm Front or Rear Door Speaker Adaptor Speaker Adaptor Plugs { vehicle_compatibility }Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Speaker Adaptor Plugs. Converts OEM Plug..

Speaker adapter cables; used to connect after market speakers to the original loom on various Nissan models.Fits vehicles aimed towards the US and Japanese markets until approximately 2005 - please see full description for compatibility.Please make sure that is the correct Speaker Harness ..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Patch lead for use with 20-XXX-SWC ISO steering wheel control cables to convert from 2 wire learning to 3.5mm jack.Use with self learning programable aftermarket units like Blaupunkt, Grundig or Road Angle. Also for some Kenwood, JVC and Sony units using their "CUSTOM" setting for stee..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Nissan radio replacement adapter cable, allows the fitting of an aftermarket car stereo upgrade by adapting the original 10 and 6 pin Nissan connectors to standard aftermarket ISO connectors.This cable includes the power and speaker supply. If the car has steering wheel controls then use item 29..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..