Nissan Micra

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Nissan radio replacement adapter cable, allows the fitting of an aftermarket car stereo upgrade by adapting the original 10 and 6 pin Nissan connectors to standard aftermarket ISO connectors.This cable includes the power and speaker supply. If the car has steering wheel controls then use item 29..

Provide a sound upgrade to your Chevrolet, Dacia, Fiat, Mitsubishi, Nissan, Renault, Vauxhall front or rear doors with our 165mm (6.5 inch) speaker upgrade fitting kit.This kit fits various Renault vehicles including. Please see our compatibility list for more cars that can benefit from this upg..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

ACV Car Stereo Installation kit for installing a new after market double din headunit into your Nissan. Kit includes Fascia Trim Panel, and Steering Control Interface Adaptor. Fitting Kit Includes:Vehicle-specific dash kit Steering wheel control interface Antenna adapter Univer..

A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. Features & BenefitsAllows you to upgrade to an aftermarket head unit whils..

Package IncludedFocal ISRNS165 Nissan Custom Fit 6.5" 2 Way Component Speakers Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker KitKey FeaturesSeparate 2-way kit - Renault, Nissan, Dacia, Smart vehicle TNB inverted dome tweeter 2 types of twe..

Adaptation Cable for the IMPULSE 4.320 Compact 4-channel Digital AmplifierThe Focal Inside NISSAN Y-ISO HARNESS head unit adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Nissan original head unit and of Foca..

Steering wheel control interface and adapter cable for Nissan Juke, Micra K13, Navara D40, Note, Qashqai and X-Trail cars to fit an aftermarket radio upgrade.The cable adapts from the 20 pin Nissan connector (the connector has a larger size terminal at either end of the connector) in the car to ..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Patch lead for use with 20-XXX-SWC ISO steering wheel control cables to convert from 2 wire learning to 3.5mm jack.Use with self learning programable aftermarket units like Blaupunkt, Grundig or Road Angle. Also for some Kenwood, JVC and Sony units using their "CUSTOM" setting for stee..

Provide a full sound upgrade to your Renault front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. This kit fits various Dacia, Fiat, Mitsubishi, Nissan, Renault, Vauxhall vehicles including. Please see our compatibility list for more cars that can benefit from this upg..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Package Includes2 Pairs of JBL 16cm 2-Way Coaxial Car Speakers 2 Pairs of 165mm 17cm Front Door Speaker Adaptor 2 Pairs of Speaker Adaptor PlugsNOT SUITABLE FOR MODELS WITH BOSE SPEAKERSStage3 627JBL Stage3 speakers bring patented technologies, world-class engineering an..

Steering wheel control interface and adapter cable for Nissan Cube, Leaf, Micra K12C, Murano II, Note and X-Trail cars with 6 function audio controls on the steering wheel and a 20 pin Nissan connector at the back of the radio. (Does not include the i button)The interface and radio adapter cable..

Nissan (2006 Onwards) Handsfree SOT cable to ISO Mute harness This cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit.This cable fits behind the car radio and is used as a break-out cable to enable the audio of the hands-free kit to play through t..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Package IncludesFocal Inside Impulse 4.320 Compact 4 Channel Car Amplifier 400 watts Focal Inside IW-NIS-YISO Adaptation ISO Cable Harness{ vehicle_compatibility }Compact 4-Channel Digital AmplifierGive your head unit a breath of fresh air. Head unit amplifiers ..

Connects2 Car Stereo Installation kit for installing a new after market double din headunit into your Nissan. Kit includes Fascia Trim Panel, and Steering Control Interface Adaptor. Fitting Kit Includes:Double Din Fascia Adaptor (Silver) Resistive Steering Wheel Control Adaptor S..