Mitsubishi

Complete cage kit and replacement car audio fascia trim to enable you to change the original radio in the car to a Double din aftermarket version.This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original O..

These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Suitable for fitting 165mm aftermarket speakers to the front and rear doors on Mitsubishi Lancer (2008-2017) vehicles.Depth/ Thickness: 25mmPlease make sure that is the correct ..

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.This interface will retain the use of the steering wheel audio controls such as use of the volume, track skip, source and phone buttons with an aftermarket head unitSteering wh..

Steering wheel control interface for 2014> model Vauxhall Vivaro, Renault Trafic, Nissan NV300 and 2016> Fiat Talento vans with standard original radios. Also fits Movano and Renault Master van and Master Truck Red Edition 2020.This interface also adapts from the white connector in the veh..

Steering wheel control interface for Mitsubishi Shogun  Outlander, Citroen C-Crosser and Peugeot 4007 vehicles with original fitted navigation head units.This interface will allow you to keep the use of the steering wheel audio controls when replacing the original head unit for an after mar..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fitting Accessor..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Double Din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fascia Note..

Mitsubishi ISO T-HarnessThe ISO-T Harness SOT lead (SOUND ON TOP) is the perfect accessory when installing an aftermarket amplifier. The ISO-T harness installed between the amplifier and vehicle, taking high-level input signal from the car and passing it through the amplifier and sending it to t..

Package Includes:JVC 16cm 6.5" 2 Way Coaxial Car Speakers 300W 165mm Front Door Speaker AdaptorJVC 16cm 6.5" 2 Way Coaxial 300W Car Speakers  (600 Watt a Pair Total)Features2-Way Coaxial 300W Peak/30W RMS Power Frequency Response: 35 - 22,000Hz Sou..

Package Includes165mm Front Or Rear Door Speaker Adaptor Rings/Panels Speaker Adaptor Plugs Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Speaker Adaptor Plugs. Converts OEM Plugs To Standard Af..

Replacement car audio fascia kit to enable you to change the original radio in the car to a double din aftermarket version This kit comes with a bespoke cage which will replace any cage supplied with the aftermarket head-unit. For Mitsubishi Outlander 2007-2013 car models that have the original OE..

This fascia adaptor allows the fitting of an aftermarket radio into the dashboard by matching the shape, style and colour of the original radio. This fascia kit uses side fixing brackets, the brackets fit directly to the sides of the new radio and the fascia panel.This replaces the need for a fi..

Replacement car audio facia to enable you to change the original radio in the car to a single and double DIN aftermarket versionFits Mitsubishi Lancer (2008-2017) and Mitsubishi Lancer Evolution X (2007-2016)This kit has side fixing brackets for double DIN installation so no cage is needed. ..

Replacement car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket version Fits Mitsubishi Lancer (2005-2008) car models.A removable pocket is included for Single DIN installation.COLOUR: DARK GREYIf fitting a double din unit you ..

This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector.The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double/single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fi..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a single / double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fa..

Adaptor Harness to add a reverse view camera to various vehicles with MEDIA Nav screen head units.Adaptor harness to add a reverse camera video input in Renault and Dacia vehicles with original media screen head units.Connects inline at the back of the original head unit. Provides 6v camera ..