Mercedes-Benz E Class

CANbus steering wheel control interface for Mercedes C (W203), CLK( W208) (W209), E (W210) -Class vehicles with original Mercedes COMMAND2 head units.This interface uses ISO connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermark..

D2B fibre optic interface designed to retain the use of the original fibre optic audio amplifier (Usually Bose systems in cars built between 1998 and 2005) in Mercedes cars to allow the fitting of an aftermarket radio upgrade.Comes with cable to connect power and D2B wakeup to connection for ori..

PRO FIT car radio fascia panel adapter with fitting cage to allow the fitting of an aftermarket Double DIN stereo upgrade.This flush fit kit fits over the front of the new head-unit without using the aftermarket beze171mm x 97mmFits Mercedes CLS (2005-2010) and E-Class (2002-2008) car mo..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

CANbus steering wheel control interface designed for all Mercedes cars with CAN bus.This interface uses requires hard wired connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as w..

D2B fibre optic interface designed to retain the use of the original fibre optic audio amplifier (Usually Bose systems in cars built between 1998 and 2005) in Mercedes cars to allow the fitting of an aftermarket radio upgrade.The interface connects at the back of the radio, it takes the phono au..

Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Revamp your Mercedes' sound system with our aftermarket upgrade solution, These plates are sold as a pair and are designed for the installation of 3.5” door s..

Mercedes Front View CameraFront view camera designed to fit into the large Mercedes badge on the front grille.170° viewing angle lens. 762 x 504 pixel resolution Waterproof and shockproof Colour night vision NTSC video formatFits Various Mercedes cars with the large Merc..

Speaker Adaptor Plugs. Converts OEM Plugs To Standard Aftermarket Speaker Connectors.Mercedes Speaker Adaptor Harness. Converts OEM Harness To Standard Aftermarket Speaker Connectors *Note - For TweeterPlease make sure that is the correct Speaker Harness Adaptor for your car by firstly che..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

CANbus steering wheel control interface for Mercedes CLS W219, E Class W211 and SLK R171 cars with original Mercedes NTG1 head units. Gives CANbus Ignition outputs and retains steering wheel controls. The CANbus interface will also give out CAN ignition, speed pulse and reverse gear outputs.Th..

FOCAL IW-MBZ-YISO Mercedes ISO Cable HarnessThe Focal Inside I IW MBZ Y-ISO HARNESS car radio adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Mercedes original car radio and of Focal Inside extensi..

This CANBUS interface will allow you to retain the audio steering wheel controls (including phone buttons) when installing an after market head unit. Wire colours Pink- speedpulse, Purple- Reverse (+12v), Green-parking brake (-12v Ground), Yellow/Black- Mute when driving in reverse or PDC active ..

A pair of speaker adaptor cables for various Mercedes A, C, CLK and E-Class car vehicle models. Use to fit new aftermarket speakers without needing to cut off the original speaker connectors.{ vehicle_compatibility }Please make sure that is the correct Speaker Harness Adaptor for your car ..

This Single Din Fascia adaptors will convert the non din-sized aperture left after removing the factory stereo to a single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Ca..

Connects2 T-Harness SOT Leads are primarily used when installing Parrot Bluetooth Car kits but can also be used to install other bluetooth devices and hands free kits into car. SOT lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the hand..

A pair of front door car speaker adapter panels for 130mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, mo..

MOST Fibre optic interface to allow the fitting of a new head unit into a Mercedes Benz with HARMON KARDON original audio and retain the use of the fibre optic amplifier. You will lose front to rear fading ability.if the car has speaker wiring in the  Quadlock connector  then it is ..

Speaker adapter cables;  used to connect after market speakers to the original loom on most Mercedes models built after 2014May not fit all speakers on all versions of every vehicle. Some vehicles have subwoofers or tweeters with different connections. May not fit cars with premium amplifie..