Mercedes-Benz E Class

BLAM presents the RELAX 100MNC, a set of innovative 2-way 4 Inch (100mm) coaxial speakers perfectly designed for select Mercedes Benz and Tesla 3 car models. Speaker upgrades can be more difficult on Mercedes car models as they have very narrow 10cm slots in the doors and very specific subwoofers un..

A pair of front or rear door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical InformationSpeaker: 165 mm Panel cut out: 143.50 mm Outer diameter: 168 mm Ring hei..

Retain Reverse Camera (FAKRA) for Mercedes Audio 20 and COMANDAllows you to retain an original reverse camera from a Mercedes factory fitted Audio 20 or COMAND head unit when fitting an after-market radio.This cable is only compatible with single fakra connections. Double fakra connections..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

This complete Double Din Radio Replacement Kit by Connects2. CTKMB05, allows the fitment of a Double DIN aftermarket headunit to the selected vehicle. The kit includes everything you need to complete the installation including fascia, steering stalk controls, and aerial connections.Connects2 CTK..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

CANbus steering wheel control interface for Mercedes CLS W219, E Class W211 and SLK R171 cars with original Mercedes NTG1 head units. Gives CANbus Ignition outputs and retains steering wheel controls. The CANbus interface will also give out CAN ignition, speed pulse and reverse gear outputs.Th..

D2B fibre optic interface designed to retain the use of the original fibre optic audio amplifier (Usually Bose systems in cars built between 1998 and 2005) in Mercedes cars to allow the fitting of an aftermarket radio upgrade.Comes with cable to connect power and D2B wakeup to connection for ori..

CANbus steering wheel control interface for Mercedes C (W203), CLK( W208) (W209), E (W210) -Class vehicles with original COMAND 2.0 head units. This interface will allow the original audio control buttons on the steering wheel to work with the new aftermarket radio. The interface will work the volum..

CANbus steering wheel control interface designed for all Mercedes cars with CAN bus.This interface uses requires hard wired connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as w..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Plug & Play Special Mercedes Benz 8 inch Subwoofer for Right Hand Drive vehiclesSystem includes two 200 mm (8”) subwoofersSuitable for: Mercedes C class Convertible A205, Coupe C205, Sedan W205, T Model S205,  Mercedes E Class Convertible A238, Coupe C238, Sedan W213, T Model ..

D2B fibre optic interface designed to retain the use of the original fibre optic audio amplifier (Usually Bose systems in cars built between 1998 and 2005) in Mercedes cars to allow the fitting of an aftermarket radio upgrade.The interface connects at the back of the radio, it takes the phono au..

MOST fibre optic interface designed to retain the use of the original fibre optic audio amplifier (Mercedes Audio Gateway or harman/kardon amplifier) in Mercedes CL, CLS, E Class, SL and SLK cars to allow the fitting of an aftermarket radio upgrade.The interface connects at the back of the radio..

Connects2 Fakra to DIN & ISO Antenna Adaptor with Phantom Power Supply, Converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna ..

CANBUS steering wheel control interface for Mercedes with original Mercedes Comand APS NTG2.5 head units.This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus ou..

Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Seco..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Amplifier bypass cable for Mercedes E Class W211 cars with original COMAND navigation systems. This cable extends from the dashboard to the amplifier in the rear of the vehicle and bypasses the amplifier to allow a new stereo to work with the original speakers in the car. A Fakra to DIN antenna ad..

CANbus steering wheel control interface for Mercedes C (W203) CLK (W208) E (W210) Class vehicles with factory fitted Audio 10 systems.The cable adapts from the Quadlock connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapte..