Mercedes-Benz CLS

PRO FIT car radio fascia panel adapter with fitting cage to allow the fitting of an aftermarket Double DIN stereo upgrade.This flush fit kit fits over the front of the new head-unit without using the aftermarket beze171mm x 97mmFits Mercedes CLS (2005-2010) and E-Class (2002-2008) car mo..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

CANbus steering wheel control interface designed for all Mercedes cars with CAN bus.This interface uses requires hard wired connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also provides CANbus outputs as w..

Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Revamp your Mercedes' sound system with our aftermarket upgrade solution, These plates are sold as a pair and are designed for the installation of 3.5” door s..

Mercedes Front View CameraFront view camera designed to fit into the large Mercedes badge on the front grille.170° viewing angle lens. 762 x 504 pixel resolution Waterproof and shockproof Colour night vision NTSC video formatFits Various Mercedes cars with the large Merc..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

CANbus steering wheel control interface for Mercedes CLS W219, E Class W211 and SLK R171 cars with original Mercedes NTG1 head units. Gives CANbus Ignition outputs and retains steering wheel controls. The CANbus interface will also give out CAN ignition, speed pulse and reverse gear outputs.Th..

This CANBUS interface will allow you to retain the audio steering wheel controls (including phone buttons) when installing an after market head unit. Wire colours Pink- speedpulse, Purple- Reverse (+12v), Green-parking brake (-12v Ground), Yellow/Black- Mute when driving in reverse or PDC active ..

Steering wheel control interface and adapter cable for various Mercedes cars to fit an aftermarket radio upgrade.The cable adapts from the Quadlock connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable.The CANbu..

CANbus steering wheel control interface for various Mercedes cars. Gives CANbus Ignition outputs and retains steering wheel controls. The CANbus interface will also give out CAN ignition, speed pulse, reverse gear and hand brake signals.This CANbus interface will allow you to retain the audio ..

Connects2 T-Harness SOT Leads are primarily used when installing Parrot Bluetooth Car kits but can also be used to install other bluetooth devices and hands free kits into car. SOT lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the hand..

MOST Fibre optic interface to allow the fitting of a new head unit into a Mercedes Benz with HARMON KARDON original audio and retain the use of the fibre optic amplifier. You will lose front to rear fading ability.if the car has speaker wiring in the  Quadlock connector  then it is ..

Speaker adapter cables;  used to connect after market speakers to the original loom on most Mercedes models built after 2014May not fit all speakers on all versions of every vehicle. Some vehicles have subwoofers or tweeters with different connections. May not fit cars with premium amplifie..

This SOT adapter cable is designed to allow the fitting of an aftermarket handsfree bluetooth phone kit, such as a Parrot or Bury kit.The adapter lead connects between the original connectors at the back of the radio and provides ISO power and speaker connections to the handsfree kit. This allow..

Replacement car audio fascia to enable you to change the original radio in the car to a single and double DIN aftermarket versionFits Mercedes CLS (W219) (2005 - 2010) and E-Class (W211) (2002 - 2008) car modelsA removable pocket is included for Single DIN installation.COLOUR: MATT BLACK..

Double Fakra Aerial adapter cable for European cars that have twin non amplified original antennas.This cable converts the cars existing Twin fakra aerial plug to an aftermarket DIN type used by most car radio manufacturers.For Alpine Radios use item 21-101 to convert the DIN end to ISO. ..

OEM Units With Horizontal Release KeysSTEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent stereo theft. This means that to remove one of these units..

Fakra Male to Female Extension 5m5 meter male to female Fakra antenna cable extension. With water blue universal Fakra cable.Used to extend the fakra connector when fitted at the rear of a car..

OEM Units With Horizontal Release KeysSTEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent stereo theft. This means that to remove one of these units..

Mercedes E class, CL & SLK Audio 20 NTG1 Quadlock cable to be used in conjunction with an ISO Mute harness normally supplied with the hands-free car kit.(This quadlock is wired differently from other Mercedes quadlocks)This cable fits behind the car radio and is used as a break-out cable..