ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..
Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..
Mazda (2010>) - DIN Antenna Adaptor With Phantom Power Supply. For Aftermarket Radio With DIN Antenna Connector. Converts car specific antenna connector to a universal aftermarket connectorAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit ..
Mazda car audio interface cable with power and speaker ISO connections allowing use of original steering wheel buttons with a new aftermarket head-unit. Use with Mazda cars made after 2000.Does not allow access to trip display, clock or fader control that is on some newer Mazda cars.Wha..
Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..
This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..
Complete fitting kit to install a double din aftermarket unit in a 2004-2008 model Mazda RX8. This kit will retain the use of the climate controls and the steering wheel audio controls.Package IncludesDouble Din Fascia Flush Mount Matt Black
Steering wheel control interface
ISO Harnes..
ISO to ISO Amplifier Integration Interface4 channel adjustable ISO to ISO amplifier interface.Use to install a new radio in a car that has an original fit amplifier that takes a pre amplified audio feed.This interface converts the high level audio output of a new head unit to a low level..
Connects2 T-Harness SOT Leads are primarily used when installing Parrot Bluetooth Car kits but can also be used to install other bluetooth devices and hands free kits into car. SOT lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the hand..
This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..
These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single/Double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fasc..
Connects2 T-Harness SOT Leads are primarily used when installing Parrot Bluetooth Car kits but can also be used to install other bluetooth devices and hands free kits into car. SOT lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the hand..
This cable converts the cars existing aerial plug to an aftermarket DIN type used by most car radio manufacturers.Honda car radio antenna antenna cable adapter for cars made after 2006 with amplified antenna.
Also fits some later model Holden, Isuzu, Mazda and Suzuki carsAerial Adapto..
ISO T cable for Ford Ranger & Mazda cars.This cable fits behind the car radio and is used as a break-out cable to enable the audio of the hands-free kit to play through the cars speakers.Use with Parrot CK3000, CK3100, CK3200 LS, MKI9000, MKI9100, MKI9200If using on BOSE cars use the..
A pair of premium high-end BLAM 690RC (6 X 9 INCH) coaxial speakers.This system includes two 6"x9" woofers, with coaxial 25mm (1") soft dome tweeters and two integrated 6 dB/octave crossovers.The BLAM 690RC are designed to provide incredible performance. Because of their high ..
Package IncludesPioneer Class D 4 Channel Multi Channel Car Amplifier 400W
Parrot SOT T-Harness Adaptor LeadCompact 4 Channel Power.An amplifier shouldn’t take up too much space, especially in your car. That is why this Class-D amp might just be what you are looking for...
Complete fitting kit to install a Single DIN aftermarket unit in a 2004-2008 model Mazda RX8. This kit will retain the use of the climate controls and the steering wheel audio controls.Package IncludesSingle Din Fascia Matt Black
Steering wheel control interface
ISO Harness
Climate ..
Replacement car audio fascia to enable you to change the original radio in the car to a Single or Double DIN aftermarket version
This fascia kit has a removable pocket depending on the installation.Also has side fixing brackets so no radio cage kit is requiredFits Mazda RX-8 car models...
This Cable allows you to connect a Chinese aftermarket car radio with European ISO connectors to the cars wiring using the original connectors in the car.This cable will retain the use of the steering wheel controls when fitting an aftermarket head-units with resistive programmable steering cont..
Car radio lead for Mazda cars. Connects the new radio to the cars original connector These cars have a one piece connector behind the radio.{ vehicle_compatibility }For cars with BOSE use with item 20-273Harness AdaptorsConnect the head unit to the original radio connector w..