Mazda Premacy

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Mazda car audio interface cable with power and speaker ISO connections allowing use of original steering wheel buttons with a new aftermarket head-unit. Use with Mazda cars made after 2000.Does not allow access to trip display, clock or fader control that is on some newer Mazda cars.Wha..

CTAMPPASSTHROUGHThe CTAMPPASSTHROUGH is an amplifier retention adapter which converts the new head unit’s high-level audio output to a low-level audio signal which will work with the vehicle’s original amplifier (reduces the output volume from the aftermarket stereo to the factory am..

Phoenix Gold ZDT-MAZ1 T-HarnessUpgrade your vehicle’s audio with our T-Harness for Mazda vehicles. Our plug-and-play solution makes it easy to upgrade your audio by integrating seamlessly with our amplifiers. Built for a hassle-free installation, with everything you need included, no ..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

Patch lead for use with 20-XXX-SWC ISO steering wheel control cables to convert from 2 wire learning to 3.5mm jack.Use with self learning programable aftermarket units like Blaupunkt, Grundig or Road Angle. Also for some Kenwood, JVC and Sony units using their "CUSTOM" setting for stee..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

Package IncludesPioneer TS-A1371F 5 Inch 13cm 3 Way Coaxial Car Speaker System (300W) 130mm Front Door Speaker Adaptors{ vehicle_compatibility }It Just Got Easier To Upgrade Your Genuine OEM Sound.Upgrade the original sound system of your car. Our A series line up can give yo..

ZXMPM1 is a Plug and Play power-up kit made for Mazda (for a full model list please view Vehicle Applications). The ZXMPM1 power up kit consists of a variety of technology designed to improve the overall audio output of a vehicle. The ZXMPM1 includes a ZXM500.4 Amplifier and ZXMISOT2 ISO-T harness. ..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Connects2 T-Harness SOT Leads are primarily used when installing Parrot Bluetooth Car kits but can also be used to install other bluetooth devices and hands free kits into car. SOT lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the hand..

This Cable allows you to connect a Chinese aftermarket car radio with European ISO connectors to the cars wiring using the original connectors in the car.This cable will retain the use of the steering wheel controls when fitting an aftermarket head-units with resistive programmable steering cont..

Car radio lead for Mazda cars. Connects the new radio to the cars original connector These cars have a one piece connector behind the radio.{ vehicle_compatibility }For cars with BOSE use with item 20-273Harness AdaptorsConnect the head unit to the original radio connector w..

Mazda (2010>) - DIN Antenna Adaptor With Phantom Power Supply. For Aftermarket Radio With DIN Antenna Connector. Converts car specific antenna connector to a universal aftermarket connectorAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit ..

Package IncludesPioneer GM-DX104 4 Channel Class D Bridgeable Car Amplifier 400W Parrot SOT T-Harness Adaptor Lead{ vehicle_compatibility }GM-DX104Compact, space saving, easy to install micro 4-Channel amplifier (400 W) featuring High Resolution Audio, Class-D Technology and c..