Mazda 6

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

A pair of speaker adapter cables for various Abarth, Fiat, Ford, Mazda and Jaguar vehicle models. Use to fit new aftermarket speakers without needing to cut off the original speaker connectors.May not fit all versions of every vehicle. Some amplified and named sound systems such as BOSE, or Bow..

Patch lead for use with 20-XXX-SWC ISO steering wheel control cables to convert from 2 wire learning to 3.5mm jack.Use with self learning programable aftermarket units like Blaupunkt, Grundig or Road Angle. Also for some Kenwood, JVC and Sony units using their "CUSTOM" setting for stee..

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit.This interface will retain the use of the steering wheel audio controls with an aftermarket head unit, as well as telephone buttons/ phone commands.Also provides vehicle speed ..

Package IncludesPioneer G-series 17cm 6.3/4 inch 2-Way 300W Coaxial Car Speakers 165mm 17cm Speaker AdaptorPioneer TS-G1720F G-series 17cm 6.3/4 inch 2-Way 300W Coaxial Car SpeakersFor better-sounding drives. Discover the renewed G-seriesThe improved G-series speaker range is..

This cable converts the cars existing aerial plug to an aftermarket DIN type used by most car radio manufacturers.Honda car radio antenna antenna cable adapter for cars made after 2006 with amplified antenna.  Also fits some later model Holden, Isuzu, Mazda and Suzuki carsAerial Adapto..

Mazda AUX-IN Retention LeadKeeps original  USB and AUX  sockets on Mazda cars from 2012 on. Allows you  to maintain the cars existing AUX socket and use it with a new aftermarket head-unit. This unit uses the cars original housingContains special PCB which replaces the one in..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Mazda car audio interface cable with power and speaker ISO connections allowing use of original steering wheel buttons with a new aftermarket head-unit. Use with Mazda cars made after 2000.Does not allow access to trip display, clock or fader control that is on some newer Mazda cars.Wha..

CAM-MZ1-RT Mazda Car Reverse Camera Retention InterfaceThe CAM-MZ1-RT is a reversing camera retention lead specially designed for the 2012 to 2014 Mazda 6. This easy to install plug and play system allows users to retain the use of the factory installed camera system when installing an aftermark..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Seco..

Package Includes:JBL Stage2 65 (6.5") 2-Way Coaxial Car Speakers 480 Watt 165mm Speaker Adaptor{ vehicle_compatibility }Stage2 65Upgrade your car audio to the next level with the powerful JBL Stage2 65 car speakers. These 6.5-inch coaxial speakers offer an impressive 480 ..

ISO to ISO Amplifier Integration Interface4 channel adjustable ISO to ISO amplifier interface.Use to install a new radio in a car that has an original fit amplifier that takes a pre amplified audio feed.This interface converts the high level audio output of a new head unit to a low level..

Package IncludesKenwood KFC-S1766 Stage Sound Series 17cm 6.5" 2-Way Coaxial Car Speaker 300 Watts 165mm 17cm Speaker AdaptorKenwood KFC-S1766 Stage Sound Series 17cm 6.5" 2-Way Coaxial Car Speaker 300 WattsKey FeaturesStage Sound Series Flush Mount Speaker 2-..

This adapter allows you  to retain the use of the original reverse camera when fitting an aftermarket head unit.This harness can also be used to add an aftermarket camera to the original head unit.the Original camera  needs a 6V feed and not a 12V so this must be used with item 10-671 ..

CTAMPPASSTHROUGHThe CTAMPPASSTHROUGH is an amplifier retention adapter which converts the new head unit’s high-level audio output to a low-level audio signal which will work with the vehicle’s original amplifier (reduces the output volume from the aftermarket stereo to the factory am..

Car audio metal cage kit and trim 103mm high. Needed with some double din fascias that do not fit the normal 113mm cages supplied with aftermarket head-units.This kit is designed to replace the metal cage kit that is usually supplied with your new aftermarket double din head-unit or navigation s..

Complete fitting kit to change the original radio in a 2012 onward 3rd generation Mazda 6 for a double din after market unit.Package IncludesDouble Din Fascia With Brackets Steering Wheel Control Interface AM/FM Antenna Adaptor Universal patch lead (Included)Fascia Adaptor..