Ford Puma

SOT harness for 2018 onward Ford vehicles that have the new style connector at the back of the radio.Use this harness to install an aftermarket handsfree kit to the vehicle.This cable fits behind the car radio and is used as a break-out cable to enable the audio of the hands-free kit to play..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Retention camera interface allowing you to retain/ keep the factory OEM fitted reverse view camera on select Ford vehicles with SYNC 2 (8 Inch) or SYNC 3 systems.When fitting an aftermarket head unit, this t-harness cable uses a 54 pin connector which connects to the back of the vehicles OEM SYN..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Please Note:&nb..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThese side bars are made to replace the OEM radio on a range of European Fords built between approximately 1995 and 2005. These are distinguishable by being just slightly smaller..

Ford ISO T-HarnessThe ISO-T Harness SOT lead (SOUND ON TOP) is the perfect accessory when installing an aftermarket amplifier. The ISO-T harness installed between the amplifier and vehicle, taking high-level input signal from the car and passing it through the amplifier and sending it to the spe..

This complete Single Din Radio Replacement Kit, allows the fitment of an aftermarket headunit to the selected vehicle. The kit includes fascia, steering stalk controls, removal keys and aerial connections.Ford Fitting Kit Includes:Fascia Panel Adaptor (Black) Steering Wheel Interface ..

The ISO-T Harness SOT lead (SOUND ON TOP) is the perfect accessory when installing an aftermarket amplifier. The ISO-T harness installed between the amplifier and vehicle, taking high-level input signal from the car and passing it through the amplifier and sending it to the speakers. The SOT leads a..

This complete Single Din Radio Replacement Kit by Connects2 CTKFD27, allows the fitment of a Single DIN aftermarket headunit to the selected vehicle. The kit includes fascia, steering stalk controls, stereo removal keys and aerial connections.Connects2 CTKFD27 IncludesSingle Din Fascia Ad..

Connects2 CTKFD01-ISO Ford Single Din Stereo Replacement Kit allows fitment of a Single DIN aftermarket headunit to the selected vehicle. The kit includes fascia, ISO wiring harness,aerial connections and release keys.Connects2 CTKFD01-ISO Includes:Single Din Fascia Panel ISO Wirin..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Speaker adapter cables;  used connect the aftermarket speakers.Please make sure that is the correct Speaker Harness Adaptor for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the shape of adaptor in the pictu..

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

Ford Fitting Kit Includes:Wiring Harness Aerial Adaptor Stereo Removal KeysPlease see picture to see how the connection is done between the wiring harness adaptor and car wiring loom.Wiring HarnessThe wiring harness will allow to install the stereo. This adapter is ..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Please Note:&nb..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Complete fitting kit to install a single DIN head unit and retain the original steering wheel controlsFor Alpine head units an additional antenna adapter may be needed, part number 21-101Complete fitting kit to install a single DIN head unit and retain the original steering wheel controls ..

Complete fitting kit to install a single DIN head unit.Package IncludesSingle Din Fascia  ISO Wiring Harness Release Keys Antenna AdaptorFascia AdaptorThis adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for h..

Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Seco..