Citroen Dispatch

Package IncludesPioneer SPH-DA160DAB 6.8" Capacitive Touch Screen Bluetooth Apple Car Play DAB DAB Antenna Aerial Double Din Fascia Adaptor Panel (Matt Black) Steering Wheel Control Interface Fakra to DIN Antenna Adaptor Stereo patch lead{ vehicle_compatibility }Power..

Audio cable to convert Citroen/ Fiat/ Peugeot & Toyota cars with Quadlock connector to a European car radio with ISO connectors.Includes CANbus 12v accessory ignition supplyThe car has CAN bus data. The interface provides a key in ignition supply from the data.Harness Adaptors ..

The CAM-CT1 is a Brake Light Reversing Camera for the Citroen Dispatch, Jumpy and Spacetourer, replaces the vehicles original third brake light. The camera features an impressive IP69K weatherproof rating meaning it can withstand all the weather conditions thrown at it. It also features a 1/3”..

Replacement car audio fascia to enable you to change the original radio in the car to a double DIN aftermarket versionThis fascia is a trim piece that covers the radio cage to give a professional finish when an after market double DIN radio is installed in a range of Peugeot, Citroen, Fiat and T..

Adaptor cable to convert Stallantis vehicles with the 2016 onwards NAC radios to a standard ISO connector for fitting an aftermarket head unit.The harness has a built in CANbus interface that provides a key present ignition power supply to the radio, and and illumination output on most cars. Ins..

Connects2 CTKCT01 Double Din Radio Replacement Kit, allows the fitment of a Double DIN aftermarket headunit to the selected vehicle. This kit includes Double DIN Fascia Kit, CAN-Bus Steering Wheel Control Interface, FAKRA Antenna Adapter & Universal Patch lead.Connects2 CTKCT01 Includes:..

Special rear camera for Peugeot Expert, Citroen Dispatch and Toyota ProAce vehicles from 2016 onward. Replaces the rear high level brake light.12v power Colour CMOS image, NTSC. 150° View Angle IP68 Waterproof Includes power cable and 10 meter video cableAn additional inte..

Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio, retain the use of the steering wheel audio controls and parking sensors tones in Citroen, Fiat, Peugeot, Toyota and Vauxhall vehicles with a standard radio system.Package IncludesDouble Din Fascia Adaptor Panel..

Citroen / Fiat /  Peugeot Toyota & Vauxhall Quadlock cable to be used in conjunction with an ISO Mute harness normally supplied with the hands-free car kit.With flying lead to connect to +12 volt ignition.This cable fits behind the car radio and is used as a break-out cable to enabl..

Radio replacement adapter cable for Peugeot and Citroen cars 2017 onward. Use to connect an aftermarket stereo upgrade.Radio replacement adapter cable for various Peugeot and Citroen cars from 2017 onward.Adapts from the large connector in the car to standard aftermarket ISO connectors to al..

A pair of front door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical InformationLoudspeaker: 165 mm Installation cutout: 145 mm Ring outside: 171.6 mm Ring heig..

Connects2 T-Harness SOT Leads are primarily used when installing Parrot Bluetooth Car kits but can also be used to install other bluetooth devices and hands free kits into the car. SOT lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the ..

Reverse Gear Car Radio Mute Relay CableSpecial relay to mute audio when reversing to allow parking tones to be heard clearly.This relay is designed for aftermarket radio fittings where a parking sensor retention interface has been fitted. This relay will use a positive reverse gear signal t..

Connects2 Fakra to DIN & ISO Antenna Adaptor with Phantom Power Supply, Converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna ..

Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in Citroen, Fiat, Peugeot, Toyota and Vauxhall vehicles with a standard radio system.Package IncludesDouble Din Fascia Adaptor Panel (Matt Black) Steerin..

Special rear camera for Peugeot Expert, Citroen Dispatch and Toyota ProAce vehicles from 2007-2016. This replaces the rear high level brake light.12v power Colour CMOS image, NTSC. 150° View Angle IP68 Waterproof Includes power cable and 10 meter video cableBelow is an image..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fascia Note..

Fakra to Din Antenna Adaptor with Phantom Power Supply. This adapter converts car specific antenna connecter to a DIN aftermarket connector. Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are..

CANbus steering wheel control interface for cars with Quadlock connectors behind the radio.This interface will also allow the steering wheel controls to access the display screen menu. The CANbus interface will also give out CAN ignition, speed pulse, reverse gear and hand brake signals.This..

Connects2 T-Harness SOT Leads are primarily used when installing Parrot Bluetooth Car kits but can also be used to install other bluetooth devices and hands free kits into the car. SOT lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the ..