Citroen DS3

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Audio cable to convert Citroen/ Fiat/ Peugeot & Toyota cars with Quadlock connector to a European car radio with ISO connectors.Includes CANbus 12v accessory ignition supplyThe car has CAN bus data. The interface provides a key in ignition supply from the data.Harness Adaptors ..

Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in Citroen C3 (2010-2016) and DS3 (2010-2019) car models. The interface in this kit has an additional BUZZER to retain the original front and rear parking sensor tone..

Car Audio Stereo Installation kit for installing a new after market Single din headunit into your Citroen. This is complete kit including Fascia Trim Panel, Steering Control Interface for Volume Controls on Steering Wheel, Aerial Adaptor and Removal Keys.Package Includes:Single Din Fascia..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

CANbus steering wheel control and parking sensor retention interface for cars with quadlock connectors behind the radio.This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also pro..

Connects2 Fakra to DIN & ISO Antenna Adaptor with Phantom Power Supply, Converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna ..

A pair of speaker adapter cables for various Citroen Berlingo I, C3, Xantia, XM and Xsara vehicle models. Use to fit new aftermarket speakers without needing to cut off the original speaker connectors.Please make sure that is the correct Speaker Harness Adaptor for your car by firstly checkin..

This trim set allows the fitting of a new radio from original to a single din aftermarket version. This trim kit includes 2mm, 4mm and 10mm trim spacers to allow the new radio to be brought forward flush with the cars dash.{ vehicle_compatibility }COLOUR: MATT BLACKCar Audio F..

Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in select Citroen C3 (2010-2016) and Citroen DS3 (2010-2019) car models.Package IncludesDouble Din Fascia Kit (Matt Black) Steering Wheel Control Interfa..

Citroen / Fiat /  Peugeot Toyota & Vauxhall Quadlock cable to be used in conjunction with an ISO Mute harness normally supplied with the hands-free car kit.With flying lead to connect to +12 volt ignition.This cable fits behind the car radio and is used as a break-out cable to enabl..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fascia Note..

MDF panels for Citroen C3, C3 Picasso and DS3 cars to fit 165mm speakers to the front doors.  These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking ..

CANbus steering wheel control interface for cars with Quadlock connectors behind the radio.This interface will also allow the steering wheel controls to access the display screen menu. The CANbus interface will also give out CAN ignition, speed pulse, reverse gear and hand brake signals.This..

Reverse Gear Car Radio Mute Relay CableSpecial relay to mute audio when reversing to allow parking tones to be heard clearly.This relay is designed for aftermarket radio fittings where a parking sensor retention interface has been fitted. This relay will use a positive reverse gear signal t..

A pair of rear parcel shelf car speaker adapter panels for 130mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your..

Citroen OEM USB RetentionFeaturesAllows the retention of the OEM USB socket Maintains the vehicles aesthetics, whilst allowing an upgrade from the factory head unit..

Standard two prong radio release keys used on Blaupunkt, Grundig, VDO, Philips style radios.STEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent ster..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio...