Cable to convert Citroen/ Fiat/ Peugeot & Toyota cars with Quadlock connector to a European car radio with ISO connectors.This cable has a loose wire for connecting to an ignition source in the car as their is no traditional + 12v key in ignition supply behind radio. The car has CAN bus data..
Fakra to ISO Antenna Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN versions..
This trim set allows the fitting of a new radio from original to a single din aftermarket version. This trim kit includes 2mm, 4mm and 10mm trim spacers to allow the new radio to be brought forward flush with the cars dash.{ vehicle_compatibility }COLOUR: MATT BLACKCar Audio F..
Reverse Gear Car Radio Mute Relay CableSpecial relay to mute audio when reversing to allow parking tones to be heard clearly.This relay is designed for aftermarket radio fittings where a parking sensor retention interface has been fitted.
This relay will use a positive reverse gear signal t..
These new adapters have both Male DIN and ISO connections eliminating the need to stock both DIN and ISO products, this is a must for every installer.DIN & ISO Antenna Adaptor with Phantom Power SupplyAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitte..
Connects2 T-Harness SOT Leads are primarily used when installing Parrot Bluetooth Car kits but can also be used to install other bluetooth devices and hands free kits into the car. SOT lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the ..
Speaker Adaptor Plugs. Converts OEM Plugs To Standard Aftermarket Speaker Connectors.Please make sure that is the correct Speaker Harness Adaptor for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by checking to see if the shape of ada..
Standard two prong radio release keys used on Blaupunkt, Grundig, VDO, Philips style radios.STEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent ster..
CANbus steering wheel control interface for cars with Quadlock connectors behind the radio.This interface will also allow the steering wheel controls to access the display screen menu. The CANbus interface will also give out CAN ignition, speed pulse, reverse gear and hand brake signals.This..
Steering wheel interface and audio connection wires allowing use of original buttons with a new after market radio head-unit.These cars made between 2002 and 2005 had the new Peugeot/Citroen & also for Fiat & Lancia, multiplex VANbus data protocol. The two data wires are foun..
Parking sensor buzzer retention interface. For cars that lose the parking sensor tones when the original radio is removed.The original parking tones and warning chimes in many cars are produced by the original radio and when an aftermarket radio is fitted these tones are lost. This CANbus interf..
Female ISO to Male DIN antenna adapter cableThis cable converts the cars existing ISO aerial plug to an aftermarket DIN type used by Clarion, JVC, Pioneer, Sony and other Japanese, Chinese and American radio manufacturers.Aerial AdaptorAn Aerial Adaptor is needed when replacing the origi..
Audio cable to convert Citroen/ Fiat/ Peugeot & Toyota cars with Quadlock connector to a European car radio with ISO connectors.Includes CANbus 12v accessory ignition supplyThe car has CAN bus data. The interface provides a key in ignition supply from the data.Harness Adaptors
..
Citroen / Fiat / Peugeot Toyota & Vauxhall Quadlock cable to be used in conjunction with an ISO Mute harness normally supplied with the hands-free car kit.With flying lead to connect to +12 volt ignition.This cable fits behind the car radio and is used as a break-out cable to enabl..
Adaptation Cable for the IMPULSE 4.320 Compact 4-channel Digital AmplifierThe Focal Inside IW-PSA-YISO HARNESS head unit adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Citroën, DS Automobiles et Peugeo..
Connects2 Fakra to DIN & ISO Antenna Adaptor with Phantom Power Supply, Converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna ..
This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..
Twin Fakra - DIN Antenna Adaptor KitAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN versions. Antenna Aerial Adaptor, converts car specific antenna connector ..
Package IncludesPioneer Class D 4 Channel Multi Channel Car Amplifier 400W
InCarTec Quadlock to ISO Mute SOT Cable{ vehicle_compatibility }Compact 4 Channel Power.An amplifier shouldn’t take up too much space, especially in your car. That is why this Class-D amp might ju..
Package IncludesKenwood DMX7722DABS Wireless Apple CarPlay Android Auto Digital Media AV Receiver DAB Stereo
DAB Aerial
Double Din Fascia Panel (Black)
Steering Control Stalk Adaptor
Aerial Adaptors
Stereo Removal Keys
Stereo Patch LeadBy connecting your smartphone and DMX77..