Chevrolet Aveo

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

Adapter cable to connect various General Motors cars and trucks to standard ISO connectors to enable the fitting of an aftermarket head unit.This adapter harness is designed to adapt from the original 44 Pin connector in the dashboard of various Chevrolet, Cadillac, Vauxhall, Opel, Holden vehicl..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Car audio metal cage kit and trim 103mm high. Needed with some double din fascias that do not fit the normal 113mm cages supplied with aftermarket head-units.This kit is designed to replace the metal cage kit that is usually supplied with your new aftermarket double din head-unit or navigation s..

Package Includes:JL Audio C1-650x 6.5" 16.5cm 2 Way Yellow Cone Car Speakers 165mm Speaker Adaptor Panels Speaker Adaptor Cables Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker Kit{ vehicle_compatibility }C1-650xCoaxial Speaker System: 6.5-inch ..

Recoil RLM65 Level‑3 6.5″ Component Speaker SystemDrive your sound to the next level with the Recoil RLM65 Level-3 Series 6.5" Component Speaker System. With 80W RMS (160W peak), vibrant yellow pressed-paper cones and nitrile rubber surrounds deliver punchy mid-bass and fast response...

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

ZXMPGM1 is a Plug and Play power-up kit made for Chevrolet and Opel/Vauxhall vehicles (for a full model list please view Vehicle Applications). The ZXMPGM1 power up kit consists of a variety of technology designed to improve the overall audio output of a vehicle. The ZXMPGM1 includes a ZXM500.4 Ampl..

Connects2 CTKCV02 Double Din Radio Replacement Kit allows the fitment of a Double DIN aftermarket headunit to the selected vehicle. The kit includes double din fascia, Steering Wheel Interface, Antenna Adaptor and Universal Patch lead.{ vehicle_compatibility }Connects2 CTKCV02 Includes..

A pair of front or rear door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 165 mm Installation cutout: 143.5 mm Ring outside: 164.3 mm Ring h..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fitting A..

Provide a full sound upgrade to your front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. This kit fits various GM vehicles including Chevrolet, Holden, Vauxhall and Saab 9-4X  . Please see our compatibility list for more cars that can benefit from this upgrade ki..

Provide a sound upgrade to your front or rear doors with our 165mm (6.5 inch) speaker upgrade fitting kit.This kit fits various GM vehicles including Chevrolet, Holden, Vauxhall and Saab 9-4X. Please see our compatibility list for more cars that can benefit from this upgrade kit.This fitti..

Car Audio Steering wheel interface and ISO cables allowing use of original buttons with a new aftermarket head-unit. This interface will retain the use of the steering wheel audio controls with an aftermarket head unit.Suitable for Chevrolet Captiva, Epica, Aveo and Spark car models with the new..

Provide a full sound upgrade to your front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. This kit fits various GM vehicles including Chevrolet, Holden, Vauxhall and Saab 9-4X  . Please see our compatibility list for more cars that can benefit from this upgrade ki..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Speaker adapter cable used to connect aftermarket speakers to the original connectors in the cars, These 2 way connectors fit many models of Japanese cars.Please make sure that is the correct Speaker Harness Adaptor for your car by firstly checking to see if your make, model and year of c..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Package IncludesPioneer Class D 4 Channel Multi Channel Car Amplifier 400W InCarTec ISO Mute SOT Cable{ vehicle_compatibility }Compact 4 Channel Power.An amplifier shouldn’t take up too much space, especially in your car. That is why this Class-D amp might just be w..