Bmw All Models

BMW sub-woofer adapter cable allows you to change the woofers underneath BMW front seats. Connects to original harness. { vehicle_compatibility }..

Adaptor cable to fit an aftermarket stereo upgrade in a BMW X5 E53 car with original sat nav and DSP amplifier and retain the use of the steering wheel controls.This cable adapts from the original connector in the car, known as a quadlock, to standard aftermarket connectors for the new stereo, k..

Fakra to Din Antenna Aerial Adaptor, Suitable for Aftermarket Radio With DIN Antenna Connector. Converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fascia Note..

The ISO-T Harness SOT lead (SOUND ON TOP) is the perfect accessory when installing an aftermarket amplifier. The ISO-T harness installed between the amplifier and vehicle, taking high-level input signal from the car and passing it through the amplifier and sending it to the speakers. The SOT leads a..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.Please check connection before ordering, this item is only for Round Pin connection type.&n..

Black Fakra to ISO & DIN Aerial Adaptor, converts car specific antenna connector to a universal DIN or ISO connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO an..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fitting A..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

BMW ISO T-HarnessThe ISO-T Harness SOT lead (SOUND ON TOP) is the perfect accessory when installing an aftermarket amplifier. The ISO-T  harness installed between the amplifier and vehicle, taking high-level input signal from the car and passing it through the amplifier and sending it to th..

Package IncludesPIONEER 6.3/4 inch 17cm 2-Way Coaxial Car Audio Speaker 165mm Speaker AdaptorFor better-sounding drives. Discover the renewed G-seriesThe improved G-series speaker range is specifically developed for premium and powerful audio, with excellent value for money. Thei..

Complete stereo upgrade kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in BMW X5 F15/F85 (2013-2018) car models with non-amplified audio systems.The kit comes with all you need to install an aftermarket head unit while retaining the use of y..

Complete fitting kit to install a Double DIN head unit and retain use of steering wheel controls in BMW 3-Series (E46) cars with navigation radio and Quadlock Connector.Package IncludesDouble Din Fascia Kit Steering Control Interface Fakra to Din Antenna Adaptor Cable Fakra Mal..

Complete fitting kit to install a Double DIN head unit and retain steering wheel controls in BMW 3-Series (E46) cars fitted with Basic radio and Harman/Kardon audio systems. Includes cutting guides and new panels to allow easier modification of the heater box which is needed to fit a full sized Doub..

Complete fitting kit to install a Double DIN head unit and retain the original steering wheel controls and parking sensor tones in BMW 3 series (E90/E91/E92/E93) car models. This kit also retains the use of the original heated seat and start stop switches.Package IncludesDouble Din Fascia..

Complete fitting kit to install a single DIN head unit and retain the original steering wheel controls in a BMW 5 series E39 with the quadlock connector at the back of the radio.Package IncludesSingle Din Fascia (Black) Steering Wheel Control Interface Antenna Adaptor Universal patc..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket versionFits BMW 3-Series E90 (2005-2013) including E91 Touring, E92 Coupe and E93 ConvertibleOnly for models without OEM navigation and with automatic climate control / air conditio..

Replacement car audio fascia to enable you to change the original radio in the car to a Double Din aftermarket version. This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio.Su..

A pair of front door car speaker adapter panels for 100mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Fits front and rear doors of the BMW 5-Series (E60 and E61) 2004 - 2010These panels are designed to clamp a ne..