Abarth 500

Use to convert the original (Fakra DAB) antenna connector in a car to a female SMB (used on aftermarket head-units){ vehicle_compatibility }Car Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modi..

This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector.The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is..

Recoil Level 3-Series RLX65 6.5 inch (165mm) 2-way full-range Coaxial SpeakersBoost your car’s sound with the RecoIL Audio RLX65 Level-3 Series 6.5-inch coaxial speaker system. Featuring a high-strength pressed paper cone, PEI dome tweeter with Neodymium magnet, nitrile rubber surround, an..

Package IncludesSTINGER IE268E 6.8" Screen Wireless Apple Carplay / Android Auto, Bluetooth, DAB+ Stereo DAB Aerial Double Din Radio Fascia (GLOSS BLACK) CANBUS Steering Wheel Control Interface (Larger style Connector) Fakra to Din Antenna Adaptor Cable Fakra DAB Male to D..

CANbus steering wheel control interface for Abarth, Alfa Romeo, Chrysler, Citroen, Fiat, Ford, Iveco, Lancia, Peugeot & Vauxhall vehicles with older style ISO connections.This interface uses ISO connectors behind the radio to retain the use of the steering wheel controls and provide CANbus o..

Provide a full sound upgrade to your Abarth, Citroen, Fiat or Vauxhall front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. This kit fits various Abarth, Citroen, Ford, Fiat, Holden, Iveco, Peugeot and Vauxhall vehicle models. Please see our compatibility list for more..

Complete stereo upgrade fitting kit to install a Double DIN aftermarket car stereo head unit and retain the use of the steering wheel controls in Abarth and Fiat 500 (2016-2021) car models with a standard factory radio system.Retains steering wheel controls, original DAB and FM. Does not retain ..

Provide a full sound upgrade to your Abarth, Citroen, Fiat or Vauxhall front or rear doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. This kit fits various Abarth, Citroen, Fiat, Holden, Iveco, Peugeot and Vauxhall vehicle models. Please see our compatibility list for more cars ..

Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel controls in Abarth and Fiat 500 car models with a factory UConnect 5 Inch radio systems.This interface included in this kit will also allow vehicle information such as clock adj..

Provide a sound upgrade to your Abarth/ Fiat 500 (2008-2016) front doors with our 165mm (6.5 inch) BLAM EXPRESS 165EC coaxial speaker upgrade fitting kit. Each fitting kit contains a set of BLAM EXPRESS 165EC 165mm (6.5inch) Hi-efficiency 2ohm Coaxial speakers. This speaker upgrade fitting kit ..

A pair of speaker adapter cables for various Abarth, Fiat, Chrysler and Lancia vehicle models. Use to fit new aftermarket speakers without needing to cut off the original speaker connectors.Fits various Abarth, Fiat, Chrysler and Lancia vehicle models:Please make sure that is the correct ..

Upgrade your Vehicle with this 165?mm front or rear door speaker fitting kit featuring premium Recoil RLX65 Level 3 6.5? coaxial speakers.The kit includes vehicle-specific adapter panels and plug-and-play wiring leads for a seamless, non-destructive installation. Enjoy clearer highs, improved mi..

Recoil RLM65 Level‑3 6.5″ Component Speaker SystemDrive your sound to the next level with the Recoil RLM65 Level-3 Series 6.5" Component Speaker System. With 80W RMS (160W peak), vibrant yellow pressed-paper cones and nitrile rubber surrounds deliver punchy mid-bass and fast response...

Provide a sound upgrade to your Abarth/ Fiat 500 (2008-2016) front doors with our 165mm (6.5 inch) BLAM RELAX 165RC coaxial speaker upgrade fitting kit. Each fitting kit contains a set of BLAM Relax 165RC 165mm (6.5inch) Hi-efficiency 2ohm, 2-Way Coaxial speakers. This speaker upgrade fitting kit is..

Replacement car audio fascia to enable you to change the original radio in the car to a single DIN aftermarket version Fits Abarth 500 (2008-2016) car models{ vehicle_compatibility }COLOUR: MATT BLACKCar Audio Fitting Accessories are sold with limited instructions. Some knowledge ..

Upgrade the rear hatch audio in your Abarth or Fiat 500 (2008–2016) with this speaker fitting kit. It includes Recoil RLX65 Level 3 6.5" (165mm) coaxial speakers, custom-fit 165mm adapter panels, and speaker adapter cables. Designed to work with factory rear hatch speaker locations, this ..

Provide a sound upgrade to your Abarth/ Fiat 500 (2008-2016) rear side hatch speakers with our 165mm (6.5 inch) BLAM RELAX 165RC coaxial speaker upgrade fitting kit. Each fitting kit contains a set of BLAM Relax 165RC 165mm (6.5inch) Hi-efficiency 2ohm, 2-Way Coaxial speakers.This Coaxial spea..

Provide a sound upgrade to your Abarth/ Fiat 500 (2008-2016) rear side hatch speakers with our 165mm (6.5 inch) BLAM EXPRESS 165EC coaxial speaker upgrade fitting kit. Each fitting kit contains a set of BLAM EXPRESS 165EC 165mm (6.5inch) Hi-efficiency 2ohm Coaxial speakers.This Coaxial sp..

ISO adapter harness for Abarth, Alfa Romeo, Citroen, Fiat, Peugeot and Vauxhall cars with the new style connector. Use to install an after market head unit.New style connector to standard ISO connectors.Harness AdaptorsConnect the head unit to the original radio connector without the nee..

Upgrade your car's audio system without cutting or modifying factory wiring. The InCarTec 41-045 tweeter adapter cables are designed to connect aftermarket tweeters or small speakers directly to your vehicle’s OEM speaker harness – making installation clean, fast, and secure.Thes..