Toyota Proace

Package Includes:JL Audio C1-650x 6.5" 16.5cm 2 Way Yellow Cone Car Speakers 165mm Speaker Adaptor Panels Speaker Adaptor Cables Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker Kit{ vehicle_compatibility }C1-650xCoaxial Speaker System: 6.5-inch ..

Provide a full sound upgrade to your Jaguar front doors with our complete 165mm (6.5 inch) speaker upgrade fitting kit. This kit fits various Citroen, Fiat, Peugeot, Toyota, Vauxhall vehicle models. Please see our compatibility list for more cars that can benefit from this upgrade kit.  This sp..

Adaptor cable to convert Stallantis vehicles with the 2016 onwards NAC radios to a standard ISO connector for fitting an aftermarket head unit.The harness has a built in CANbus interface that provides a key present ignition power supply to the radio, and and illumination output on most cars...

Toyota Antenna Adaptor. For Aftermarket Radio With DIN Antenna ConnectorAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN versions. Antenna Aerial Adaptor, conv..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Single din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Car Audio Fitting A..

SOT adapter cable for 2017 onward Citroen and Peugeot cars to allow the fitting of an aftermarket handsfree bluetooth phone kit.This SOT adapter cable is designed to allow the fitting of an aftermarket handsfree bluetooth phone kit, such as a Parrot or Bury kit.The adapter lead connects betw..

Double DIN car radio fascia for Citroen Berlingo, Peugeot Partner and Rifter, Toyota ProAce City and Vauxhall/Opel Combo E (2018 onwards) vehicle models.Only suitable for aftermarket radios with  "L shaped Single DIN chassis" with a chassis at the lower end (e.g. Alpine ILX705D) o..

Fakra to Din Antenna Adaptor with Phantom Power Supply. This adapter converts car specific antenna connecter to a DIN aftermarket connector. Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are..

Phoenix Gold ZDT-PSA1 T-Harness With a Quadlock (16 Wires Populated In Radio Connector)Upgrade your vehicle’s audio with our T-Harness. Our plug-and-play solution makes it easy to upgrade your audio by integrating seamlessly with our amplifiers. Built for a hassle-free installati..

Radio replacement adapter cable for Peugeot and Citroen cars 2017 onward. Use to connect an aftermarket stereo upgrade.Radio replacement adapter cable for various Peugeot and Citroen cars from 2017 onward.Adapts from the large connector in the car to standard aftermarket ISO connectors to al..

Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio, retain the use of the steering wheel audio controls and parking sensors tones in Citroen, Fiat, Peugeot, Toyota and Vauxhall vehicles with a standard radio system.Package IncludesDouble Din Fascia Adaptor Panel..

Reverse view high level brake light camera and video monitor kit specially designed for Peugeot Expert, Citroen Dispatch and Toyota ProAce vehicle models from 2016 onwardsThe camera included in this kit replaces the high level brake light at the rear of the vehicle and provides additional visual..

Toyota Antenna Adaptor. For Aftermarket Radio With DIN Antenna ConnectorAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN versions. Antenna Aerial Adaptor, conv..

Cable to convert Citroen/ Fiat/ Peugeot & Toyota cars with Quadlock connector to a European car radio with ISO connectors.This cable has a loose wire for connecting to an ignition source in the car as their is no traditional + 12v key in ignition supply behind radio. The car has CAN bus data..

A pair of front door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical InformationLoudspeaker: 165 mm Installation cutout: 145 mm Ring outside: 171.6 mm Ring heig..

CANbus steering wheel control interface for cars with Quadlock connectors behind the radio.This interface will also allow the steering wheel controls to access the display screen menu. The CANbus interface will also give out CAN ignition, speed pulse, reverse gear and hand brake signals.This..

Audio cable to convert Citroen/ Fiat/ Peugeot & Toyota cars with Quadlock connector to a European car radio with ISO connectors.Includes CANbus 12v accessory ignition supplyThe car has CAN bus data. The interface provides a key in ignition supply from the data.Harness Adaptors ..

CANbus steering wheel control and parking sensor retention interface for cars with quadlock connectors behind the radio.This interface uses quadlock connections behind the original radio to allow the use of the original steering wheel control buttons with a new aftermarket head-unit. It also pro..

Toyota Antenna Adaptor. For Aftermarket Radio With DIN Antenna ConnectorAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN versions. Antenna Aerial Adaptor, conv..

Package IncludesPioneer GM-DX104 4 Channel Class D Bridgeable Car Amplifier 400W InCarTec Quadlock to ISO Mute SOT Cable{ vehicle_compatibility }GM-DX104Compact, space saving, easy to install micro 4-Channel amplifier (400 W) featuring High Resolution Audio, Class-D Technology..