Seat Mii

Double Fakra to Male DIN aerial antenna adapter cable (With 12v phantom power)This antenna adapter cable adapts from the original Double Fakra connector in the vehicle to a standard aftermarket radio DIN antenna connection for the fitting of a stereo upgrade.This cable converts the original ..

Package IncludedFocal ACX 165 6.5" (16.5cm) 2 Way Coaxial Car Speaker Kit (Sold As Pair) 165mm Speaker Adaptor Stinger RKXSK Expert Sound Proofing Deadening Material 2 Sheet Speaker Kit6 1/2” (16,5CM) 2-WAY Coaxial KitThe 2-way coaxial kit ACX 165 delivers neutral and..

Complete stereo upgrade fitting kit to install a Single DIN aftermarket radio into VW UP, Seat Mii, Skoda Citigo car models.Package IncludesSingle Din Fascia (GLOSS BLACK) Quadlock to ISO Radio Adaptor Harness, with CANBus Ignition and Antenna AdaptorFascia AdaptorThis adaptor..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

This complete Single Din Radio Replacement Kit by Connects2 CTKSK01-ISO, allows the fitment of a Single DIN aftermarket headunit to the selected vehicle. The kit includes everything you need to complete the installation including fascia, wiring harness, and aerial connections.Connects2 CTKSK01-I..

Package IncludesKenwood Stage Sound Series 17cm 6.5" 2-Way Coaxial Car Speaker 300 Watts 165mm Speaker AdaptorKey FeaturesStage Sound Series Flush Mount Speaker 2-Way 2-Speaker System 17 cm Polypropylene Woofer Cone Heavy-Duty Woofer Magnet Circuit 25mm Blanced D..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version.Fits Seat Mii , Skoda Citigo  and Volkswagen Up! Only for cars with glovebox lid and manual climate controls. Does not fit cars with 'Climatronic' automati..

Phoenix Gold ZDT-QL1 T-Harness AdaptorUpgrade your vehicle’s audio with our T-Harness. Our plug-and-play solution makes it easy to upgrade your audio by integrating seamlessly with our amplifiers. Built for a hassle-free installation, with everything you need included, no cutting or s..

This cable converts the original antenna connector in the car, known as a Fakra connector, to a standard aftermarket antenna connector, known as a DIN connector.The adapter cable has a built in module which provides a phantom power feed to the original antenna in the car. A phantom power feed is..

Handsfree ISO T hraness for VW cars made after 2010 with newer style Quadlock connector also fit for Seat & Skoda Cars.Flying ignition for connection 12v IgnitionThis cable fits behind the radio and routes the phone audio through the front speakers.If the original radio connector &nb..

Audi / VW / Seat / Skoda & Porsche Quadlock cable to be used in conjunction with an ISO Mute harness normally supplied with the hands-free car kit.This cable has a flying lead for connection to an ignition supply. For a plug and play solution with CAN ignition use item 10-536-IGNThis cab..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.This fascia panel i..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

ZXMPVW2 is a Plug and Play power-up kit. The ZXMPVW2 power up kit consists of a variety of technology designed to improve the overall audio output of a vehicle. The ZXMPVW2 includes a ZXM500.4 Amplifier and ZXMISOT2 ISO-T harness. Utilising the high-level signals from your vehicle and passing it thr..

Steering wheel control interface and adapter cable to fit an aftermarket radio upgrade. The cable adapts from the Quadlock connector in the car to standard aftermarket ISO connectors. This replaces the need for a separate ISO radio replacement adapter cable.This interface will allow the original..

This vehicle-specific Single DIN stereo upgrade fitting kit has been engineered to simplify the installation of an aftermarket head unit into facelift models fitted with the trapezoid-shaped factory radio. The included Gloss Black fascia panel adapts the original dashboard opening to a standard Sing..

CTLOCVAG2-4CH MIB/PQ (52 pin Quad lock) 4 Channel Line Out ConverterWhether you're adding an aftermarket amplifier or DSP, our 4-Channel Line Output Converter ensures optimal performance with minimal installation hassle. With advanced signal processing and high-level inputs the 4 Channe..

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket version This fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. Suit..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Replacement car audio fascia to enable you to change the original radio in the car to a Single DIN aftermarket versionThis fascia adapter allows the fitting of an aftermarket radio into the cars dashboard by matching the shape, style, size and colour of the original OEM factory fitted radio. &nb..