SEAT Toledo

A pair of ISO standard speaker adapter cables for various Abarth, Alfa Romeo, Audi, Citroen, Chrysler, Fiat, Holden, Iveco, Jaguar, Lancia, Peugeot, Porsche, Seat, Skoda, Renault, Vauxhall, Volkswagen And Volvo car vehicle models.Use to fit new aftermarket speakers without needing to cut off the..

A pair of front or rear door car speaker adapter panels for 200mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 200 mm Installation cutout: 183.5 mm Ring outside: 211.5 mm Ring h..

Connects2 INFODAPTER allows vehicle information such as Climate Control, Parking Sensors and Heated seats to be displayed on any aftermarket AV head unit. This information would usually be displayed on the original head unit and therefore would not be retained without the use of an INFODAPTER. The i..

These adaptors will convert the non din-sized aperture left after removing the factory stereo to a Double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fascia Note..

Connects2 T-Harness SOT Leads are primarily used when installing Parrot Bluetooth Car kits but can also be used to install other bluetooth devices and hands free kits into the car. SOT lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the ..

CAN to UART Interface for VW platforms (MIB-PQ - Seat, Skoda and VW)The APF-X303VW is the latest generation of Alpine interfaces for Volkswagen platform vehicles (including Skoda and Seat) to connect an Alpine navigation or Digital Media Station seamlessly to your vehicle’s electronics / C..

Package Includes:Fascia Panel (Black) Removal Keys Fascia AdaptorThis adaptor will convert the non din-sized aperture left after removing the factory stereo to a din size ready for head unit installation. The high quality finish, colour and texture are designed specifically t..

Radio Replacement Kit, allows the fitment of a Single DIN aftermarket headunit to the selected vehicle. This kit includes Fascia, Wiring Harness, and aerial connections. Package Includes:Fascia Panel Adaptor (Black) Wiring Harness Adaptor Aerial AdaptorsFascia AdaptorTh..

Handsfree ISO T hraness for VW cars made after 2010 with newer style inserts. Also for Seat & Skoda Cars.Flying ignition for connection 12v Ignition. Complete with full 24  through put wires to maintain the cars AUX functions, This cable fits behind the radio and routes the pho..

Audi / VW / Seat / Skoda & Porsche Quadlock cable to be used in conjunction with an ISO Mute harness normally supplied with the hands-free car kit.This cable has a flying lead for connection to an ignition supply. For a plug and play solution with CAN ignition use item 10-536-IGNThis cab..

Connects2 Fakra to DIN & ISO Antenna Adaptor with Phantom Power Supply, Converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna ..

Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Seco..

Speaker Adaptor kits allow aftermarket standard size speakers to be fitted into the original apertures of your car audio system.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, model and year of car is listed in the advert. Seco..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Connects2 VAG Double Fakra to DIN Antenna Adaptor. Twin FAKRA to DIN Antenna Adaptor With Phantom Power Supply. For Aftermarket Radio With DIN Antenna Connector. Converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when r..

Complete stereo upgrade fitting kit to install a Double DIN head unit into various 2005 onwards Volkswagen, Seat, Skoda car models.This kit is suitable for VW car models with a single Fakra antenna connection on the back of the original radioThis is an alternative product to FK-714-SWCPa..

A pair of front or rear door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 165 mm Installation cutout: 145 mm Ring outside: 183 mm Ring heigh..

Connects2 INFODAPTER allows vehicle information such as Climate Control, Parking Sensors and Heated seats to be displayed on any aftermarket AV head unit. This information would usually be displayed on the original head unit and therefore would not be retained without the use of an INFODAPTER. The i..

Fakra Antenna Adaptor Kit Converts car specific antenna connector to a universal aftermarket connector,Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN version..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..