Nissan Cube

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Replacement car audio fascia to enable you to change the original radio in the car to a Double DIN aftermarket version When fitting a new head unit using the cars original mounting brackets, a small gap is sometimes left around the unit. This trim fills out the gap for a neater finish. Suitable fo..

Fascia adaptors will convert the non din-sized aperture left after removing the factory stereo to a Double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fascia Not..

Steering wheel control interface and adapter cable for Nissan Cube, Leaf, Micra K12C, Murano II, Note and X-Trail cars with 6 function audio controls on the steering wheel and a 20 pin Nissan connector at the back of the radio. (Does not include the i button)The interface and radio adapter cable..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Fascia adaptors will convert the non din-sized aperture left after removing the factory stereo to a Double din size ready for head unit installation. The high quality finish, colour and texture are designed specifically to maintain the original look of your vehicles interior.Important Fascia Not..

Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN versions. Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector. ..

A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit. Features & BenefitsAllows you to upgrade to an aftermarket head unit whils..

Grey rectangle female antenna connector to male DIN car aerial antenna adapter cable.This cable adapts from the grey plastic rectangle antenna connector in the car to a standard aftermarket male DIN connector, this is used when fitting a new aftermarket radio.This is a passive antenna adapte..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Chevrolet, Nissan, Renault, Vauxhall radio replacement adapter cable, allows the fitting of an aftermarket car stereo upgrade by adapting the original 20 pin Nissan connector to standard aftermarket ISO connectors.This cable includes the power and speaker supply. If the car has steering wheel co..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Package IncludesPioneer Class D 4 Channel Multi Channel Car Amplifier 400W SOT Cable to ISO Mute Harness Lead{ vehicle_compatibility }Compact 4 Channel Power.An amplifier shouldn’t take up too much space, especially in your car. That is why this Class-D amp might just be..

Nissan (2006 Onwards) Handsfree SOT cable to ISO Mute harness This cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit.This cable fits behind the car radio and is used as a break-out cable to enable the audio of the hands-free kit to play through t..

Patch lead for use with 20-XXX-SWC ISO steering wheel control cables to convert from 2 wire learning to 3.5mm jack.Use with self learning programable aftermarket units like Blaupunkt, Grundig or Road Angle. Also for some Kenwood, JVC and Sony units using their "CUSTOM" setting for stee..

ZXMPN1 is a Plug and Play power-up kit made for Nissan (for a full model list please view Vehicle Applications). The ZXMPN1 power up kit consists of a variety of technology designed to improve the overall audio output of a vehicle. The ZXMPN1 includes a ZXM500.4 Amplifier and ZXMISOT2 ISO-T harness...