Mitsubishi Shogun

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.This interface also retains the use of the 360 panoramic camera system and provides outputs for parking brake, speed pulse and reverse.Will also retain OEM amplifier and factory phone buttons..

A pair of front or rear door car speaker adapter panels for 165mm speakers. These MDF panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical DataLoudspeaker: 165 mm Installation cutout: 140 mm Outer Diameter: 191.2mm Rin..

ISO T cable for most Mitsubishi, Isuzu & Eagle cars This cable is used in conjunction with an ISO Mute harness supplied with the hands-free car kit. Use when fitting handsfree car kits.This cable fits behind the car radio and is used as a break-out cable to enable the audio of the h..

 This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring..

This cable allows you to connect an aftermarket car radio with European iso connectors to the cars wiring using the original connectors in the car.Not suitable for cars with Rockford amplified speakersHarness AdaptorsConnect the head unit to the original radio connector without t..

A pair of Speaker adapter cables used to connect after market speakers to the original loom.{ vehicle_compatibility }Please make sure that is the correct Speaker Harness Adaptor for your car by firstly checking to see if your make, model and year of car is listed in the advert. Secondly by..

Steering wheel control interface for Mitsubishi Shogun  Outlander, Citroen C-Crosser and Peugeot 4007 vehicles with original fitted navigation head units.This interface will allow you to keep the use of the steering wheel audio controls when replacing the original head unit for an after mar..

Specific Mitsubishi cars after 2007 without original SAT Nav. This cable allows you to connect an aftermarket car radio with European iso connectors to the cars wiring using the original connectors in the car.Not suitable for cars with Rockford amplified speakersHarness AdaptorsC..

Replacement car audio fascia to enable you to change the original radio in the car to a  double DIN aftermarket version.172mm x 98mmThis is a flush fit fascia. Please use the original metal brackets found on the original radio.Fits Mitsubishi Shogun (2007-2022) car modelsCOLOUR:..

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

Universal Electric Aerial. Supplied with 13 different headsFeaturesReplacement antenna to upgrade or replace an existing antennaCar Audio Fitting Accessories are sold with limited instructions. Some knowledge of car audio installation is helpful, as in some rare case "modific..

Connects2 T-Harness SOT Leads are primarily used when installing Parrot Bluetooth Car kits but can also be used to install other bluetooth devices and hands free kits into the car. SOT lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the ..

Car Audio Steering wheel interface allowing use of original buttons with a new aftermarket head-unit.This interface also retains the use of the 360 panoramic camera system and provides outputs for parking brake, speed pulse and reverse.Will also retain OEM amplifier and factory phone buttons..

Suitable for the removal of all ISO Radios which have 2 or 1 square or round slots/holes on each side of the stereo.These keys are designed to remove the original unit from the vehicles MITSUBISHIWe try to provide upto date information. If you are unsure about the model number please ..