Mazda RX-8

ISO to Din Antenna Aerial Adaptor, converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN ver..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Connects2 T-Harness SOT Leads are primarily used when installing Parrot Bluetooth Car kits but can also be used to install other bluetooth devices and hands free kits into car. SOT lead is designed to interface between the radio and the radio harness. It provides a power and earth supply to the hand..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..

Connects2 Steering Wheel Control Interface Adaptor. Connecting to the original radio connector and plugging in to the back of the new head unit is simple to fit.A stalk/steering wheel control adaptor allows you to upgrade to an aftermarket head unit whilst maintaining use of your factory steerin..

Mazda car audio interface cable with power and speaker ISO connections allowing use of original steering wheel buttons with a new aftermarket head-unit. Use with Mazda cars made after 2000.Does not allow access to trip display, clock or fader control that is on some newer Mazda cars.Wha..

CTAMPPASSTHROUGHThe CTAMPPASSTHROUGH is an amplifier retention adapter which converts the new head unit’s high-level audio output to a low-level audio signal which will work with the vehicle’s original amplifier (reduces the output volume from the aftermarket stereo to the factory am..

ISO to ISO Amplifier Integration Interface4 channel adjustable ISO to ISO amplifier interface.Use to install a new radio in a car that has an original fit amplifier that takes a pre amplified audio feed.This interface converts the high level audio output of a new head unit to a low level..

A pair of premium high-end BLAM 690RC (6 X 9 INCH) coaxial speakers.This system includes two 6"x9" woofers, with coaxial 25mm (1") soft dome tweeters and two integrated 6 dB/octave crossovers.The BLAM 690RC are designed to provide incredible performance. Because of their high ..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

Complete fitting kit to install a double din aftermarket unit in a 2003-2010 model Mazda RX8. This kit will retain the use of the climate controls and the steering wheel audio controls.Package IncludesDouble Din Fascia Flush Mount Matt Black Steering wheel control interface ISO Harnes..

This adapter allows an aftermarket head unit to be installed, whilst bypassing the factory fitted amplified system. This adapter is designed to match the correct impedance of the vehicles speaker system.When connected your new stereo may not power up, and this is no fault of the wiring harness..

Package IncludesPioneer Class D 4 Channel Multi Channel Car Amplifier 400W Parrot SOT T-Harness Adaptor LeadCompact 4 Channel Power.An amplifier shouldn’t take up too much space, especially in your car. That is why this Class-D amp might just be what you are looking for...

This cable converts the cars existing aerial plug to an aftermarket DIN type used by most car radio manufacturers.Honda car radio antenna antenna cable adapter for cars made after 2006 with amplified antenna.  Also fits some later model Holden, Isuzu, Mazda and Suzuki carsAerial Adapto..

ZXMPM1 is a Plug and Play power-up kit made for Mazda (for a full model list please view Vehicle Applications). The ZXMPM1 power up kit consists of a variety of technology designed to improve the overall audio output of a vehicle. The ZXMPM1 includes a ZXM500.4 Amplifier and ZXMISOT2 ISO-T harness. ..

Car radio lead for Mazda cars. Connects the new radio to the cars original connector These cars have a one piece connector behind the radio.{ vehicle_compatibility }For cars with BOSE use with item 20-273Harness AdaptorsConnect the head unit to the original radio connector w..

Patch lead for use with 20-XXX-SWC ISO steering wheel control cables to convert from 2 wire learning to 3.5mm jack.Use with self learning programable aftermarket units like Blaupunkt, Grundig or Road Angle. Also for some Kenwood, JVC and Sony units using their "CUSTOM" setting for stee..

ISO T cable for Ford Ranger & Mazda cars.This cable fits behind the car radio and is used as a break-out cable to enable the audio of the hands-free kit to play through the cars speakers.Use with Parrot CK3000, CK3100, CK3200 LS, MKI9000, MKI9100, MKI9200If using on BOSE cars use the..

This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..