Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in Citroen Berlingo and Peugeot Partner (2008-2018) car and van models.{ vehicle_compatibility }Package IncludesDouble Din Fascia Adaptor Trim (Matt Bl..
Complete stereo upgrade fitting kit to install a Double DIN aftermarket radio and retain the use of the steering wheel audio controls in Citroen Berlingo and Peugeot Partner (2008-2018) car and van models.The interface in this kit has an additional BUZZER to retain the original front and rear pa..
Reverse view high level brake light camera and video monitor kit specially designed for Citroen Berlingo and Peugeot Partner vehicles (2008 Onwards) vehicle models.The camera included in this kit replaces the high level brake light at the rear of the vehicle and provides additional visual safety..
Standard two prong radio release keys used on Blaupunkt, Grundig, VDO, Philips style radios.STEREO REMOVAL KEYSStereo Removal Keys to remove head unit from the fascia cage. Many OEM manufacturers are incorporating special locking mechanisms into their head units in an attempt to prevent ster..
Double DIN car radio fascia for Citroen Berlingo, Peugeot Partner and Rifter, Toyota ProAce City and Vauxhall/Opel Combo E (2018 onwards) vehicle models.Only suitable for aftermarket radios with "L shaped Single DIN chassis" with a chassis at the lower end (e.g. Alpine ILX705D) o..
A pair of front door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Technical InformationLoudspeaker: 165 mm
Installation cutout: 145 mm
Ring outside: 171.6 mm
Ring heig..
A pair of front door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Fits Citroen Berlingo and Peugeot Partner (2008-2018) vehicle models Please make sure that is the corre..
A pair of front door car speaker adapter panels for 165mm speakers. These panels allow you replace the cars original speakers with new improved quality aftermarket speakers.Please make sure that is the correct Speaker Adaptor for your vehicles by firstly checking to see if your make, ..
CANbus steering wheel control interface for cars with Quadlock connectors behind the radio.This interface will also allow the steering wheel controls to access the display screen menu. The CANbus interface will also give out CAN ignition, speed pulse, reverse gear and hand brake signals.This..
Steering wheel interface and audio connection wires allowing use of original buttons with a new after market radio head-unit.These cars made between 2002 and 2005 had the new Peugeot/Citroen & also for Fiat & Lancia, multiplex VANbus data protocol. The two data wires are foun..
Female ISO to Male DIN antenna adapter cableThis cable converts the cars existing ISO aerial plug to an aftermarket DIN type used by Clarion, JVC, Pioneer, Sony and other Japanese, Chinese and American radio manufacturers.Aerial AdaptorAn Aerial Adaptor is needed when replacing the origi..
Adaptor cable to convert Stallantis vehicles with the 2016 onwards NAC radios to a standard ISO connector for fitting an aftermarket head unit.The harness has a built in CANbus interface that provides a key present ignition power supply to the radio, and and illumination output on most cars. Ins..
Audio cable to convert Citroen/ Fiat/ Peugeot & Toyota cars with Quadlock connector to a European car radio with ISO connectors.Includes CANbus 12v accessory ignition supplyThe car has CAN bus data. The interface provides a key in ignition supply from the data.Harness Adaptors
..
Citroen / Fiat / Peugeot Toyota & Vauxhall Quadlock cable to be used in conjunction with an ISO Mute harness normally supplied with the hands-free car kit.With flying lead to connect to +12 volt ignition.This cable fits behind the car radio and is used as a break-out cable to enabl..
Adaptation Cable for the IMPULSE 4.320 Compact 4-channel Digital AmplifierThe Focal Inside IW-PSA-YISO HARNESS head unit adaptation cable is designed for the IMPULSE 4.320 compact 4-channel digital amplifier. It allows the quick and simple connection of the Citroën, DS Automobiles et Peugeo..
Connects2 Fakra to DIN & ISO Antenna Adaptor with Phantom Power Supply, Converts car specific antenna connector to a universal aftermarket connector.Aerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna ..
This adaptor is required to replace factory fitted radio with an aftermarket headunit (Alpine, Pioneer, Kenwood, Sony, JVC etc.). It will convert the car original power and speakers wiring connector to a standard ISO connector. Simply plug one end of the adaptor into your cars wiring harness, and th..
Twin Fakra - DIN Antenna Adaptor KitAerial AdaptorAn Aerial Adaptor is needed when replacing the original factory fitted head unit with an aftermarket head unit. Antenna Adaptors are available in both ISO and DIN versions. Antenna Aerial Adaptor, converts car specific antenna connector ..